Was it a bottle-neck like issue with the server?
Type: Posts; User: monarke4
Was it a bottle-neck like issue with the server?
Eggggzactly ;)
I noticed though that clicking on the Rep-Power button seems to still have a slight amount of lag before the Yes/No option pops up. Maybe that is on my end.
I stopped using...
Now at 4:19am PST everthing seems to be operating without lag....
I realized this when I hit "submit reply", it hiccuped several more times, sigh...
Let's spin the wheel again and see what happens.... :)
Well when I hit edit, it happened quickly.....
Here...
Seems the immediate crisis may be over...
For the last couple hours I tried, I could only access the thread with a reply long enough to read it but not reply before the 504 Code appeared once...
Seems the firmware of this CS-4003i I now own was updated too version 2VK_S000.002.551 2022.08.25 before I took delivery.
Confirmed that the serial number is the same.
Slapping four-haid. ...
Thank You...
Seems Kyocera and the Copystar brand re-used Bulletin numbers?
I suppose for the amateur like myself this can be a bit confuzzling. However those well seasoned techs and supers,...
Copystar Bulletin #98 (02/18/20), Setting Up Fax In A Voice Over IP Environment...
Does anyone have this bulletin which they can share?
Thank You
The service manual I have from April 2022 Rev.D0 explains that U066 (page 6-25) is the code to enable/disable the "display logo".
The machine has installed Firmware version 2VK_S000.002.551...
I went to Youtube and find a video on where to disable the Motion Sensor.
Kind of freaky! lol :eek:
My 4003i arrived today on Monday. I went in and made some adjustments to the sleep timer, in order that it doesn't stay powered up for 120 minutes etc.
Three times it cycled into power save mode...
There are so MANY tech industries where wearing a tie could be dangerous to one's health! :p
I believe even if you replace the HDD with a larger capacity drive, only the first 320gb will be recognized, not the additional space.
I could be completely mistaken but I believe there are...
Does anyone know if the WD 3200LUCT 320gb HDD (302ND93180 Parts Storage Device) used in the Taskalfa 4002i, 4003i, etc. requires a proprietary block/data file format?
If so, I suppose the only way...
Windows 98 was the latest O/S explained for use with the Aficio 5000L for the Internet Fax (NIC) specification and print drivers.
The last O/S for the Ricoh 5510L/5510NF listed on the brochure is...
The brochure I have for the 5510L/5510NF is dated c1996.
The brochure I found for the Aficio 5000L has no copyright date, but lists compatibility for printer drivers all the way back to Windows...
Sometimes I try to contribute rather than be devil's advocate. :p
Actually they are, but I didn't say they were necessarily *cheap*.
While they last, from Syncrotech NOS Elan P423 Dual Slot PCMCIA Read/Writers (It handles Linear Flash, ATA, SRAM):
PCI Bus to...
This is the machine in my own office which I purchased as a machine from an ended lease. It has served me well for the last 14 years.
That's just awful!
It conjured up thoughts of Dick Solomon and Mary Albright (Third Rock from the Sun) beating the office copier with a toner cartridge.
Dick And The Xerox MachineDick And The...
The 4mb limit I do understand.
Now I believe that I may had made a mistake in my suggestion that there might be two different version of the Linear Flash Cards Ricoh used.
The N8036701B card...
Is it possible Ricoh's engineers had a slight sense of humor?
I had shared with me a full version of Elan Memory Card Explorer Version 3.21 which runs under Windows XP. There are also claims it...
Does anyone know the difference between these two cards besides the part number?
From some extra reading on line I suspect the Ricoh P/N A2309350 is an AMC C Series compatible Linear Flash card...
Do you by chance remember what model Compaq laptop it is/was?
I was looking at specs of the eStudio257 and found there is no info in either the brochure or the op manual concerning the resolution settings for sending/receiving a fax, in Standard, Fine and...