i was searching for the problem this error code is but cant seem to find it.
does anyone know what the error stands for?
Type: Posts; User: Frits
i was searching for the problem this error code is but cant seem to find it.
does anyone know what the error stands for?
Led Head K is not working
Inspection is required. 131 : Error ~ 134 : Error
LED head detection error (131=Y, 132=M, 133=C, 134=K)
Install the LED head unit. Check the LED head fuse. Check...
Can you mail me the SST version version 1.050 to info@hcsm.nl
Thanks
In the first release of the printers the pressure springs are changed this is not common now only thing to due is replace the fuser.
if it's a problem do it this way
19645
log in extranet read SB
Here's the solution
Disable Secure negotiate on the client windows 8 or windows server 2012 until firmware is ready for use
Disable "Secure Negotiate" on the client. You can do...
Turn dhcp back on and reboot, if printing is oke check the dhcp scope and settings under dns on the server if there is an A record with the same ip adres
regards Frits
maybe this is helpfull
Disable Secure negotiate on the client windows 8 or windows server 2012 until firmware is ready for use
Disable "Secure Negotiate" on the client. You can do this...
It's a HD error Format the harddisk if error remains change the PWB
If you need a up todate file of F code mail me
Try the following, Switch the channel mode form the wireless router form auto to a fix channel did solve my problem.
Switch the setting paper in the menu under printer from auto to fix.
It now will print every format off paper you send with calling for the mp
Here the attachment for your problem13673
Printing problems Kyocera in a windows 2008 (R2) and |2011 64 bit with 32 bit clients
If you ever come across slow printing bad imaging printing ect
Perform the following...
For printing it's possible to do that with the new KX driver
Just take a look under device settings - Administrator settings - Lock settings
You can look with a password or without, option's are...
You always can log in the command center with Admin Admin even if the network password is set
Look at this SB alwso for the 3140
U68 is in the new firmware for the 3040-3140
Try this
Check SNMP to your printer on the TCP port for printing on your print server there is a check box "manage printer offline
with SNMP" also check the unicode is the same on all...
Yes we did have the same problem give me your email i'll send you a file maby it will solve your problem
http://t1.gstatic.com/images?q=tbn:ANd9GcSMBjHC33Dj-mW3IrVeKYjy9bsJUuZvEGwBCxG-MhrLT58C5TdR
See here the modification off the spring jam11 goen forever
http://t1.gstatic.com/images?q=tbn:ANd9GcSMBjHC33Dj-mW3IrVeKYjy9bsJUuZvEGwBCxG-MhrLT58C5TdR
See here the modification off the spring we used it now for over a year without the J11 jam ever...
Windows 2008 storage server x64 with a print server
During the installation off several printers on a 2008 storage server with x86 client
We where not able to install the x86 driver under the...
yes they are
it's a panel error use the boot switch under the panel reboot, shutdown, firmware the machine agian
what is your problem ?