I Agree
Type: Posts; User: waffu22
I Agree
Look at your fixing if heater lamp on. Check connector in fixing assembly
Anybody can recall this problem, ADF of Np 6050 machine it says "Place original in the feeder". I change the board found at the back of ADF but no joy.
If you have confidence with yourself, why don't you try?
I try it on Monday.
Thanks for the quick reply
sorry for the late reply on this post.
As what teckat and blackcat told, turning off potential control, theres no image return. Clearing Ram for DC controller got me an e000061-0001. DPOT values...
I replaced a new HVT. New primary and transfer assembly. Check all the wiring specially in primary and transfer assembly and its OK. But during copying the output is purely white. Meaning theirs no...
resiting in canon np 6130
*4* , press the arrow assign until you reach the word "ERROR" and press again *
it maybe a grounded transfer
How about the R-CON board? Have you tried to replaced?
Thanks.
Make Copies and Prints with Potential control off / check for improvement in the copy quality.
if not improved>>>>
With Potential Control off, try to Adjust Laser power,if no effect>
replace >>>...
after you checked and replaced, have you cleared in service mode?
Hi to all,
This is my first time to post in this section. I am a canon tech.
But because we have a few konica 7130 machine in the company where i work, i have something to ask about this...
When i make copies from glass/feeder the paper jam at upper roller and it shows error 800-001.
Anybody knows this problem please help me.
Thank you.
Or try to test the DC controller to other iR 3300 if its working...
Longest thread i ever read since i was a member here
Maybe he mean that in a second side of paper the copy is cut
Try what teckat suggested to you
Try to print a black copy to see if the result is purely black. If not try to change your HVT.
It doesn't display as 8.5 X 13 when you look at in panel board. It display as FLSC.
Mostly in iR5000 tray 4 is for 11 X 17. But you can also adjust it for other size of paper. I done this in my other machines here in my area. Mostly i used tray 4 for 8.5 X 13 paper and it works...
When i used CST 4 (8.5 X 13),the paper jam at the upper right door. The vertical path roller is OK as well as the sensor. But when i used CST 3 same size of paper the machine works fine. No jamming. ...
Thanks for the reply.
The initial problem was during scan the machine suddenly turn off. But this problem was already solved. The only problem was unit 1 need to pull out and insert back.
Have you cleared in service mode after replacing the fixing unit?