I have 3 Bizhub C550 that copies or print they come out distorted. What can I do the resolve this. This is the first time that this happen.
Hope anyone can help. Attached is a an image of what is...
Type: Posts; User: impaqsol
I have 3 Bizhub C550 that copies or print they come out distorted. What can I do the resolve this. This is the first time that this happen.
Hope anyone can help. Attached is a an image of what is...
Hi,
I have a Canon IR-105+ that is giving me black copies. Attached photo. I have exchange the following with another Canon same model with NO GOOD RESULTS, (Developer Unit, Charge Corona,...
Thxs, but I already got the enablers, If any else comes around will contact you.
Needing 3 Toshiba E-Studio 200L Print Enabler GM-1030, Please advise.
Needing 3 Toshiba E-Studio 200L Print Enabler GM-1030, Please advise.
Hi, Needing 3 Toshiba E-Studio 200L Print Enabler GM-1030. Please advise.
Yes this is the right code.
Hi,
I have a Aficio 2075 that is giving this code. Now I have done the following procedures: 5-832-001 to sevarals new HDD to Format HDD, still message continues. It does recognized the HDD...
Teebee,
You are right on the money, took the memory dimm and cleaned them reseated them and BAM it worked.
Thanks guys for all your input.
Rad
Unfortunately I don't have the service manual for this model.
Rad
Thxs for responding so fast. This copies that I've made are in b/w, but it's a color copier. It doesn't matter if copy is b/w or color it come out with lines. Here is another photo I took.
Hope...
I have a MPC3000 that prints awesome, but when I make a copy it comes out real bad with lines.
I have been told that this can be solve in service mode.
Thxs
Hi Guys,
Hope you can help. I bought a BH601 that it stays in the Konica Minolta Screen. As per what I had read in this forums is that the CF Card is bad. Well I took another CF Card and nothing....
yes is sc533
Can any one advise what this error code is?
Thxs
I have a Xerox 4150 with finisher, but I don't have the exit tray for the finisher. I would like the exit tray ( NEED PART NUMBER) and where to buy or if not how to disable the finisher option on...
Alexctx,
I turn off machine and turned back on pressing 2+8 and I was able to see the Download Mode message in the display. Can it be firmware problem what is happening.
Do you have the...
The green power light is on in the panel, but the display is blank or black. Already checked and change the 512 memory and nothing.
What else can it be?
Thxs,
Rad
Fuser working ok. I try another fuser from another machine that is working.
Thks,
Rad
Hi Everyone,
I have a Kon Min C250 that is jamming like a z fold before it gets to the Fuser unit. I have check the registration roller that is what usually happen but it seem to be working OK.
...
Hi Everyone,
I have a Canon IR-C6800 that the display is showing blank (nothing shows). The copier seem to warm up and everything, but can't know for sure. I checked all the connector and...
Yourwonfree tis is ok with me, I understand. The copier is giving me a E602-0001 code. I really don't know waht happen but it was working ok, and next day I went to the warehouse to have the copier...
Hi,
I'm in need of the SST & firmware for the Canon IR-105+. Hope you can help.
Thxs,
Rad
Yourownfree,
I need the SST and firmware for Canon IR-105plus Can you help?
Thxs,
Rad
Thxs guys was able to install the 20GB without any problems.
Thxs