No help, I am going from IE10 to MS Edge. Added the registry key "Storage2" and its contents, but no joy. Still have not heard from the moderator, or received a reset password email. Any other...
Type: Posts; User: emujo
No help, I am going from IE10 to MS Edge. Added the registry key "Storage2" and its contents, but no joy. Still have not heard from the moderator, or received a reset password email. Any other...
US...NEMA 20, and don't just change the wall outlet, the wiring back to the breaker should support 20 amp service. Emujo
You need to get your A+, Net+ and start working the IT side of this industry. IMHO within 10 years, an onsite visit from a tech with a screwdriver will be an uncommon site. Help desks will be walking...
HDD is NOT needed as we have a few customers that would only buy if there was no HDD, and we are still updating FW on these. You do lose a lot of functionality though. My guess is you have either the...
It's not, if you chose thick mode, you can't use the SD (except for cover stock) if you go ahead and run thick stock w/o telling the MFP the media type you risk PCQ, and with larger booklets you risk...
You could try setting the marketing area to EU..Might get Greek as a selection, but I've never tried anything but US and Japan. There may also be support for drivers in a Greek version. Emujo
I've seen this when the door was removed for some reason. Took a lot of small adjustments to get it to latch properly again. The slightest touch on the door would make it pop open enough to flag the...
I don't think that the fonts you are referring to will affect what is shown on the LCD display. Please let me know if I'm incorrect. Emujo
"Stop printing" has always been associated with an IU going past its life span. Someone probably did a factory reset and put the life stop mode back to stop. Search this site for PPLM and you will...
Then you have your answer, and I'm still not sure why TLS is part of the question...KM will accept the mail over port 25 or 2525, you are correct, the customer just needs to open the ports, BUT, the...
I don't see the problem either, unless you really have to know the file name of the job in the queue before you print it. I tested this on our C458 (don't have any 363s laying around). Sent a file...
Very slow, only LT-R LG feeding, low capacity and parts wear quickly. Emujo
Possibly by helping someone else before making your 1st few posts "I need firmware". Emujo
CSRC (or Vcare) is designed to work with KM servers, and you can use KMs vcare email server to send the notifications. You may also use the customers mail server to send the same notifications, but...
Issues with sleep modes, ADF is weak, and it doesn't interface well with 3rd party apps. Solid desktop printer though, and KM is releasing firmware on a regular basis to make it more like the office...
There is also a marketplace app that scans directly to dropbox.
BizHub Marketplace
Newer devices come with the appropriate hardware/firmware so that all that is needed is a 1/2 hour of...
This code seems to be "fixed" in just about every firmware release. My advice would be mirror the port and wire shark it when scanning. This will at least give you a more detailed breakdown of what...
I wanted a president that would
1. Attempt to deal with the illegal immigration issue. Too much of my tax dollars are spent on welfare for these groups, and I do believe that the factions that want...
Unable to access page scope web connection
1. HTP server is disabled in admin mode--Turn ON
2. At one point SSL was enabled, then disabled, but https://IPaddress is still cached in browser, clear...
Scan to user box/USB takes quite some time, especially with a large stack in the feeder. IMO...the user is attempting to clear a jam while the MFP is still processing the large amount of scanned...
What vendor key counter are you trying to add? Some MFPs have a loopback connector that must be removed and the key counter device takes it's place. Emujo
ID and print is a good idea, but the result is the same once the user logs in, releases the job and it is sitting in the copier print queue. If it runs out of paper, or paper is not avail (wrong...
To my knowledge, no, once the job has spooled to the copier and is ready or in the middle of the job, it will stay in queue until deleted. There is an admin setting that can be turned on to "allow...
Nope, don't think "I'm Something", I know the following
You have older devices that needed special firmware for some PKI settings, and looks like some form of HDD encryption was enabled . This was...
The same can be said about a vehicle, it may be well maintained and around 200K, but if you replace the odometer and let me assume the car only has 60K miles on it I think we will be seeing one...