i may have a enabler. I can check if your interested. I know I have enablers for 352 not sure about 230.
Type: Posts; User: hoff247
i may have a enabler. I can check if your interested. I know I have enablers for 352 not sure about 230.
Joe let me know if you can get it. I need a angular sensor pn 017-60016-000 and the motor 019-95040-103. Thanks
I have a gr3750 that needs a clamp motor. Does anyone know where I can purchase one? My normal places densi, katun, and precision do not carry riso parts. If any here has one for sale let me know....
I had someone call me on a old xerox 314 with a u1 error code. From what I can tell the paper will pull out of the tray about a inch then the copier codes out. It does it from both trays and...
most of the time when i get that code its the slg board.
here is a copy of a seldrum test chart I made in the copier. Its the same from glass or doc feed. Running paper LT. If your familiar with this test chart there is some info missing from the top...
image is not skewed. Been in the copier business for a while now, this is just the first ricoh i have worked on. On the toshibas there is a code to reduce image size front to rear that is what I...
how do I print the list? Dont have any manuals. Copies enlarged enough so it cuts off about 1/4 in on top and bottom.
dont need one anymore guys. Thanks for those that checked.
I have a ricoh 1045 that is blowing up copies from front to rear. Can anyone help me get in service mode and fix it? Just picked up this machine with 86k. What do you guys think of this machine?
Looking for a ricoh aficio 1045 service handbook. Thanks, Les
check your email
whats your email, I'll send it to you.
I saw the buyers lab site but the subscription fee is kinda steep. I am not a licensed dealer of any particular models, not even sure how hard it is to be licensed. I have been working on toshibas...
Im 2 weeks in my new copier business and I was wondering what do people use to get specs, manufacture date, suggested retail price, toner yields, cross reference and other stuff I need. I have seen...
You may have a sheet of paper stuck in the drum brush. The longer it stays in the more wear it puts on the drum.
I have a estudio 28 hanging finisher that is missing a staple unit. If anyone has one for sale let me know.
Thanks, Les
lhoff1@gmail.com
If anyone has a toshiba 810 exit tray please let me know. Thanks, Les
lhoff1@gmail.com
if c7 then input 89, not 69. Set to 0 then press start.
To enter the serviceman test command mode, press the keys as follows:
[#] key →
key → [C] key →
key
To cancel the test command mode, press the [CA] key.
main code 20 sub code 01.
Check fuser temps. I have seen this a few times on machines where techs set fuser temps too low. I normaly set mine on 190 C. Anthing lower could cause your problem.
bad or unplugged erase lamp will cause this problem. I had to replace a toner bottle couple gear and forgot to plug in erase lamp. Copier worked for about a month, then I got light copies. ...
I have been working on toshibas for 10 years and the e35 series up to the e353 are some of the better machines. Almost identical design, using mostly the same parts through the whole series. Drums...
i believe toshibas count copies at the reg roller. I dont think you can stop it.
i have seen a bad hvt cause that prob