Search:

Hai,
My papre size is 11 X 17.I had replaced the fuser unit and transfer belt with 2nd transfer roller upper and 2nd transfer roller lower,still problem exists.

LEVI

Hai All, Happy New Year

My 6501 with 700000 clicks is now giving the banding at trailing edge above 250gsm.I replaced transfer rollers upper and lower with no result.Any body can put some ideas.
...

Thanx Alboline,

Ill check and come back!!!

Hi Rodgers,
the corona wires are checked and confirmed already,because i already met with that.
Albonline,
Can you please explain how I can use the tapes.

Thanks

Hi
my km 6500 magenta and cyan color varies from side to side ie from left to right margin(parallel to drum)Replaced drum developer transfer belt transfer rollers upper and lower and charger...

Thanx Mac,
Ill try and come back,whether the gamma offset adjustment can create any other problem?
why the colorbands are appearing while printing the gray in color mode.If print from gray scale...

Hi
this was my old post and after i cant get a chance to see the machine.now i got the same tone jumping in 6501 with ic408,i calibrated with spectrometer after replacing the...

Hai,
my 6501+ic305 is printing one extra if the paper jam occures,
ie while printing 10 nos if the paper jam occures and cleared the output will
be 11 nos
need some help,thanx to all

Hi, tanks to all,

The uneven in the main scan only,I was tried in the dot1 in 53 test pattern with density 70.
Th the new charger replaced was swapped and tested Also...

Hi,
IN my KM6501 yellow is not uniform
I tried drum,developer,belt,charger and transfer rollers
done the uneven density adj too
no chance

Pls help
tanks in advance
Levi

Hai,
My km950 duplex registration is changing freequently.
Customer is using LU 408 and 11 x 17-64 gsm paper,I done the both side adjustment
from paper settings and it will work for approx 2000...

sorry for the delay
Customer is using only 13x19 paper and the weight from 170,216,250,285 gsm,the skew is in the front side.The floor is level and the pf was installed and checked with leveler....

Hai all,

2 mm skew is apperaing on my KM 6501 from 4th and 5th tray ,
i followed installation procedure no chance,

please help
thanks in advance
levi

Hai,
My KM 950 is producing very poor quality prints in photographs and pure black areas.customer is a book publisher and printing from pdf in 60gsm 11x17.I tried with photocopy and the result is...

HAi,
My 6501 prints are comiing like blured.The customer is complaining that is a gradation problem,what is gradation?In photographs the face was coming steps,like colors are not mixing(only in...

I got two 6500 and one 6501 mcs,regularly the customer will complaint that the gradation is not correct.Can any one explain me whats gradation and how can adjust . it will help me a lot.my experiance...

Hai All,


what is the basic configuration available for KM 950

lev

Hai all,
My km 6500 and 6501 not working because of the nonavailability of toner,
whether i can refil any other km toner.

levi

Hai all,

most of my estudio16/20/25,the gear which rotates the heater roller(GEAR-HR/RLR) is breaking frequently,around 40k copies

is this a manufacturing problem?

any ideas

thanks in...

Thanks Si,
i am servicing 2 6501 and one 6500,none of the customer got es1000 because of the investment.

i will try to arrange from some other places and update you

thanks helpdesk,
i am calibrating using the kotak color patches only,the yellow problem is noticible in the file like photos or with greenish like trees.overtoning is not in the deleloper.we can...

Hai All,
in my two bh 6500 the yellow color is more,if i am printing a photograph in the face the yellow tone is more,both are run only 30000 prints

any solution
thanks in advance

Thanks All,

It is skew problem only,not with registration and not consistant
Eg:If I print a 13x19 document,think the left margin on the leading edge is 20mm but when it is going to the trailing...

HI ALL,
My two 6501 is having skew problem in duplex,and is not cosistant.The first print will be good and if we print 100 sheets,the each paper will have different registration up to 5mm.one is run...

hai Tech51,

I also think these two are different,because the design of the body is different

Thanx