Thanks guys! Used the user tool SSl to gain access to the web interface. He did delete certificate 1 which switch the machine to certificate 2. Once I recreated the certificate its works fine. They...
Type: Posts; User: mongo
Thanks guys! Used the user tool SSl to gain access to the web interface. He did delete certificate 1 which switch the machine to certificate 2. Once I recreated the certificate its works fine. They...
Thanks for the suggestion I'm going back tomorrow around lunch time. Ill try the suggestion, and its going to be charge ticket written. This guy is a third party vendor, I gave them two good IT guys...
I had an IT idiot delete device certificate. He said he was setting up a scan to FTP off a youtube video. The problem is I can't log into it via web to create another certificate. I try SP 5801-17...
Its the paper add sensor in the tray ( B044-5300 ). Mongo
I went with the enclosed trailer because of the price and insurance, plus I can delivery multi machines at the same time.
I use a 6 x 10 trailer with a ramp door for all my big machines delivery. I try the pick up truck route with a folding 6 foot ramp it was to much weight and not safe unloading the equipment. Mongo
The preprinted paper uses a drying agent like tac power but thats not the problem. The spring that push the friction pad up needs to be stretch a little.I had the same problem running the water bills...
Electrical Contact cleaner like Tech Spray Blue Shower will dissolved alot of ink out depends on the size of the spot if it looks like a plate laying on the floor it will not work on a large spot.
Canon codes are usually the same from model to model this from iR 3225i
E007-0000
While the fixing motor is rotating, the marker signal is not detected
for 6 sec with the reading of the main...
You know reply's like that is full of sarcasm is one reason this is one of the last place I come for help, and if I can't find it in a search I dread posting a question. The only reason I'm posting...
I would check the registration clutch since it doing it from all trays, if its dumping developer like they do its probably in the clutch. Mongo
I google it to see which Canon motor it was and found this. Mongo
Canon FH61871020 Canon Brushless Motor For The Ir7200 / - ambry.com
Try feedroller.com they have most HP amd Lexmark manuals on there website.Youtube for getting the covers off in the right order. Mongo
Thanks for the new Goose Guide. Mongo
Had one go thur the fuser of a Mita 131 years ago. The spots and lines was bake into the upper fuser roller. I was PM a Ricoh 6600 and found a nest made in the bottom paper draw that they never used....
He said he replace the hopper so its the gears on PCU. You can order them 3rd party off ebay for around $2.00 a set. They ship from China so its takes a weeks or so to receive them. I rebuild them...
Pull the PCU and stretch the springs on the back wall of the machine and clean the contacts on the PCU. That will take care of that 2 inch band if the drum is coating not worn off. Mongo
If its turn to starts with and stop with the tone light still solid and add toner in the display. I would check the PCU gears because it will not keep adding if the VT or VSP does not change because...
I switch my shirts to dry weave polo last year. I wash then in cold water, if its only dry toner it comes out fine. If its grease or bubble jet ink, brake cleaner or blue shower ( electrical spray...
Before you go bending things check to see if the plastic tits on the top left side of the door is broken. If not I like two layers of electrical tape cut to size place on the silver actuator instead...
I live in the country. I have a 30+ pots of herbs from different mints to basil on my back porch. I also have a garden spot that about an quarter of a acre that I grow every thing I can in. The hot...
A 302 is a charge roller bias leak, its the tab or spring bent or dirty going to the charge roller, or the roller its self is bad. Plus the fuse number starts at 21 and goes up. I think you got some...
I get the drums and blades from Copylite. The developer from natrading
Type 28 I rebuild them all the time the first rebuild I change the drum and blade only and clean the charge roller ( $22.00) The second time add in changing developer and gears ( Type 1027 ) roughly...
I've seen what you describe as a black border as a drum with the coating wore off on the rear side. I'm sure you check that. Run a sky shot and see if there is any erase on the border side, because...