I will. Thanks!
Type: Posts; User: StratManDan
I will. Thanks!
No abnormal sounds that I could hear. It starts up, and will pull paper from the tray, but never makes it into the fuser. Also, there is no toner/print on the page. I've ordered a new fuser and a...
I have an HP M578 in the field that is displaying an error 13.B9.D2, Jam in Right Door. This occurs on every first attempt to run a copy, or print. When opening the right side door, after the jam...
I have an HP M578 in the field that is displaying an error 13.B9.D2, Jam in Right Door. This occurs on every first attempt to run a copy, or print. When opening the right side door, after the jam...
I'm troubleshooting a Kyocera CS 3552ci for a perpetual J4101 Jam issue, which I haven't resolved yet. In the meantime, this machine decides to throw a C7490 "Eject Fan Motor Error." Kyocera manuals...
I will check that out! Good to know! Thank you!
Can anyone share any information you may have on this jam code? The jam will clear, however it occurs every time, first print. The lead edge is making it past the registration roller/sensor, but...
Thanks for responding,
I apologize for my late answer. I've explained to the users that bold areas of toner, especially at the lead edge, which can cause this jam issue. However, at these...
Hello Everyone,
Can anyone tell me what, exactly, is it in the Kyocera 8002i Fuser that causes paper to stick, or wrap itself within the Fuser, and "accordian" each sheet of paper behind...
Thanks for the input!
Hi everyone!
Can anyone shed some light on an issue with this series machine? While in Duplex mode, sometimes the very first print, stops dead still just inside the Exit Unit, some call...
To each his own, my friend.
So, darry1322, what did you do to fix it?
Has anyone seen this error code? I've tried a spare transfer belt, removed the toner supply drive, vacuumed it out, and made sure it isn't bound up with toner. Is it possible the Toner Supply Drive...
On a whim, I tested the waste toner motor, vacuumed out the waste toner channel, and even emptied the waste toner bottle. I then utilized a DataVac Electric Duster/Blower, to blow out the waste toner...
Hi everyone,
I have an HP Color Laser Jet CP3525dn on the bench that is throwing a 59.F0 error code. I have replaced the fuser drive unit, and the DC Controller board. I've tested various...
Food for thought! Thanks!
I ordered, and installed a new size switch assembly. 5320253203
The switch assembly can be found in the manual, under Electrical Components 1, Fig. 13. It's a bit of a task getting to the switch,...
I wish I had a dollar for every time I've replaced the fuser because of this particular jam. Usually a J4211. From what I've been told, the spring on the sensor actuator, over time, becomes weak, and...
All good advice, duly noted! Thanks guys!
Thanks for the input guys! It is much appreciated!
Hi All,
I have a Ecosys (Kyocera) P6130cdn in the field that is notorious for "Cassette Not Loaded" error messages. I've discovered the issue, however I haven't come up with a good fix...
Hi everyone,
I have two Kyocera CS 8002i machines that have an issue I've never seen before, and I'm hoping someone else has seen this and can shed some light on this so I can resolve...