Please help me with changing service plan to WC6605. Thank you
Type: Posts; User: XFather
Please help me with changing service plan to WC6605. Thank you
Hello,
After several years of research and testing I managed to get a solution for reabilitaterea outer layer, CTL. I have invested and lost money to accomplish this.
I use solvent coating...
Inboard on the inside of belt. You need to remove belt from machine.
The yellow battery on CCMNVM PWB is death, you need to replace and perform to procedures for replacing battery. Search in eureka for details.
You d'not need to make DC132.
Check:
-GND on drum
-developer bias and GND
-replace drum and developer
-TC NVM
-clean ROS
-clean MOB and ADC sensor
And perform to MAXSETUP, first make automatic 0-300, 180-300, 300-600, save...
What error you have?
Yes, replace the drum fuse
replace 63mA fuse on drum
Misfeed
ok, thank you
Hi
I need sevice manual for HP Deskjet 460.
Please help me.
Sorry I do not understand. You have not yellow on the papper?
You are serviceman or operator?
please share the image, I need to see the problem
What cod error you have?
Is possible to have many problem:
NVM corupt
bad software on UI
hardware problem
etc.
Sorry for my english, too.
Regards
Initiallize all NVMs, restore critical NVM, set NVM for TC sensors, remake machine configuration, proced to maxsetup and registration setup.
Regards
TzALbg, can you help me?
Inboard.
Please verify sensor and edge sersor, be sure it is OK
Try to remove 2 screw and move drawer in the service pozition.
I maked too chips for this machine series, but I can not make yet for WC2636/3545. Please help me.
Thank you
Regards
Sorry, PN is 013R00588.
Thank you
Hello
I have XEROX WC2636 and I need dump for drums chips. Please help me.
Have you solution for this chips?
Thank you
try to make maxsetup, if the problem persist replace developer