me too burned out... leaving my job after two weeks...
Type: Posts; User: LY3IJ
me too burned out... leaving my job after two weeks...
konica 1015 or konica 2223 will work
but you have to modify bottle to fit it in :)
solved by cleaning mag roller in developing unit
thanks for the advice
and if the problem comes back do i have to replace developing unit:?
:cool:
thanks zoraldinho,
hope this will be solved by cleaning mag roller
if this will not work will paste the PG1:rolleyes:
size of paper A4
this is "test page with opened cover"
the same thing happens on prints or copies so no overhead lights involved :o
the arrow on my sample is wrong ... feed direction is...
new to canon
is this transfer roller or dev unit?
marks on back side of copier
2 dallas
this gear is 4479374802 ?
2 mcbig
please # of that kit
got bh350&pc402
ghost jams from lct machine has only 50k copies
everything looks fine in feed unit..
log shows lct @ vertical transport jams
hi all
bh 350 (oce 1035)
check jam log and foound
mdbj jams
mhat a hell is mdbj?
could not find this in service manual
xerox phaser 3600 blank screen-- only backlight
any ideas? new to this printer
i use 7235 (cheapest available here) for all 7022,7222,7228,7145 works fine
thanx will check motor cluch & sensor at the nex visit
fuser related
25 mode p47 rewrite to 0
df314 scans 1 side ok then stops(does not try to pick paper back) showing j62-3 code
what could i do with it?
f28 - transfer/separation corona unit
abilasshvk , you are talking about p26 :)
i am a minolta tech so dont know this model well
whats the part number of the doctor(recovery) blade (piece of metal only)?
where to buy them in EU ?
i have konica 1216 with 1.2 mil copies on it stil runs fine :)
thanks HuronMan ,
1-0:0 did it....
It also happens on 1:1....
So any more ideas ?
Manual says its system emergency stop
so what a hell is that?
How can i fix it?
got konica 7145 which rcreases first 1-3 A4 1-sided copies from trays 2 and 3
tray 1 works ok always
crease is between inch or two at the rear end of copy
hope it happens before the drum
new to...
raplaced drum unit
developing unit
PRDB
toner supply unit
stil the same...
any ideas?
any other tech`s HAM Radio operators?
73 de LY3IJ
copy is completly exited but shows that error code
replaced fusing unit- the same
any ideas?:confused:
i was a retailer of electronic components.. USSR made