Yeah, never mind the fuser rollers have changed 4 or 5 times. Are you changing your bearings? After a while the grease evaps and the grounding goes to crap. Many post on those fusers, is there...
Type: Posts; User: Ketchup
Yeah, never mind the fuser rollers have changed 4 or 5 times. Are you changing your bearings? After a while the grease evaps and the grounding goes to crap. Many post on those fusers, is there...
You wasted your time of Dev unit, just fyi. They might lock up on you, but its never the dev units fault on this.
Are the erase leds working? Whats the PM values at?
There were 2 types of print dongles for that copier, gm1060 and gm1061, you need the gm1061 now, since the firmware is at 330.
42426
You can't swap HDD, can't remember what Canon calls it, but its mated to the system and you cannot put into another copier.
You have a point, but we are not having issues with new ones, its the pm time 8508/7605ac developers. The devs are leaking and destroying the gears/seals, some way before pm. Toshiba bought and...
Take a look at the "Transfer bias ON timing adjustments" on pg 6-62 of 857 series manual. Its a weird scale, but basically 08-2960 is code, from least separation to most....5,4,3,2,1,0,8,7,6. This...
Its in the front lower, main front cover.
There is nothing in firmware that I see(did a search for waste and cd70, nothing shows) but your issue might be the famous "Gorilla applied wire-ties". Cut all those wire ties on that motor and...
Well you could use a ip finder program running on a windows computer on that network to help you. Otherwise, you would have to service code papercut out of the picture.
I use "advanced IP...
Along with the suggestions mentioned, watch those white "pushers" on the reg. area, there is a new type. The other issue is related to the strap, it tends to cock the whole door, so torque it...
These machines do SMB2 to Macs well, you just have to properly share the folder and use the qualified network path.....goto the network connection on the top menu bar, click prefs, then advanced for...
What are the email settings you are using....smtp-is it gmail/gsuite, office365, other? What port do you have it set at? Is it a simple relay IT setup? The time you mentioned is what is...
There is a possible recovery process that Canon has bulletinized for the e602. Whats funny is I come from the Toshiba side, and their hdds are POS, and these are the same type. Let me know if you...
Not sure on the hdds yet on those, time will tell. What is troubling is toshiba worming their way out of warranty replacements because of the high fail rate on the previous series, and I think this...
You can't do more than 15 anyway. I haven't been able to test this on a 1104 but we did on a 1112, and it will fold and not staple booklets per the tech on site.
Windows 10 was not affected by this update, only win7, 8 and server 2008. Bad thing is, if you just remove the original updates the "970" and "960", windows will reinstall it. You have to either...
This copier will do UFRII, PCL6 and PS all built in, just need a legitimate driver from canon. Unless your service company has put some special system software? Definitely sounds like bad driver...
This is correct, cannot do mutiples