Thank You will check them out and let you know.
Type: Posts; User: pudgi300
Thank You will check them out and let you know.
Thanks for the reply. Yes tried everything but it was in bad shape. I am like an expert in plastic welding from my old Kodak days.
Thanks Again
I am still looking for one of these Bizhub 1050 Suction castings p/n 56ua49020. Thank You
need it to come from usa because of shipping
[
Hi Went in and checked the Back IU and found the front gold blade spring had shifted to the back of the plastic standoff. May have happen when it install new about 40k ago. Cleaned drum unit...
Hi
Have c7000 press that started random black spots. Dev unit had 500k and developer mix 32k. I changed out the developer unit and the developer starter and problem came back. Am using...
Hi, I had the wavy at the tail end of copies. I found that replacing roller #3 fixed the problem. I installed roller 13QE45133E and machine was back perfect. The old roller was very well worn on...
Looking for a couple 56ua49020 suction case for bizhub1050. It is part under transfer/sep corona.
Ok Great Will give it a try Thanks Again
OK Thank You very much for your quick reply. Are the Embossed a better belt?
Can anyone tell me if transfer belts A9VE500100 OR A50U510501 (FOR EMBOSSED PAPER) can be used on c1070 or C7000 in place of A1DU504203? I can't find much information. prefer to use the...
BIZHUB 1050 HVT2 56UA84022 WANTED
Looking for used but good HVT2 for Konica bizhub 1050. Have paypal Always loking for other 1050 pro or c6501 parts.
Hi Thanks for your reply. I found a couple of them yesterday but will keep you in mind for future parts.
Looking for fuser gear 56ua77830 60t for konica bizhub 1050 got paypal let me know any other 1050 parts you have.
Forty five years and still kicking. Started in 1974 servicing IBM Selectric then IBM copier 1. Only 1 red flag on Copytechnet to date. Had six bypass operation and still servicing every day. Work to...
Just a little tip if someone has a BIZHUB 1050 with SC95-01 and SC80-02 when going to service mode. Machine would go to Ready To Copy but fail with J17-02 then throw SC95-01. After replacing...
Still no cure for line. Swapped transfer unit again and no change. Tried to stop between Transfer roller and fuser but very hard to time right. Did facedown print and stopped machine and still...
Going in today and swap out fuser. Let you know what happens.
Went in today and swapped the fuser and no change with the line. Did not have machine long enough for more tests. Will reply back...
I posted this earlier but put print on the end of title. It would not let me delete or edit the post Sorry did not know about that problem in system.
Have IKON 660 with faint line on...
Have IKON 660 with faint line on trailing edge. Have swapped drums,transfer unit, chargers,replaced lower transfer and separating assmy,cleaned and output erase lamps,cleaned laser lens. Meant to...
I did not intend to post in this newbie forum. I saw a post from 2010 and asked a question. Then i put my question in Wanted and i think also Parts. Been on here 11 years and never had a problem. I...
OK Butthead I put it in the wrong forum the 1st time. excuse ME all i wanted was to see if someone had a used cable or maybe had a good pin out of the cable.
I have had enough of you...
Thank you for you for your reply. I used the forum as a last resort. Plockmatic only deals with dealers. I have all the diagrams for the Plockmatic 75 and Plockmatic 310B. The problem i have is to...
Just looking for the 750003 cable to connect collator to booklet maker. Also i have been here for years.
I i need a Plockmatic cable 750003 or a good pinout for the cable. It is a 25 pin to 15 pin (AMP) cable. Thanks for any help.