@Ctl-Alt-Del: I am really happy that the printer is working perfectly again ;-)
Type: Posts; User: q2222
@Ctl-Alt-Del: I am really happy that the printer is working perfectly again ;-)
@blackcat4866:
Fortunately I had taken some photos before I started with the disassembly.- To be honest, this was quite helpful at the end ;-)
I would like to thank everybody for the hints.- My 400Ci is working perfectly again!
;-)
I could not find the missing split pin in the machine. For this reason I made a new one and assembled...
I am missing something like a grub screw/ split pin to allow the spring deflection of the part with Nr. 3.
Excuse my additional question- I am just an electronics engineer. I do not get it how this mechanical construction should work reliably with the parts I have found in my 400ci (frictional...
@blackcat4866: You were 100% right: I will try to fix it somehow.
41985
Thank you very much for the suggestion blackcat4866. I will try it with the paper for sure.
@CWP: You were completely right.- The drive coupling between the machine and k dv unit is loose. ;-(
@CWP: You were completely right. I have done everything I could imagine without success. Last Friday the Kyocera support looked at it: In the maintenance menu they could read out the errors:
Error...
OK, thank you all for these hints, I will look at it tomorrow again.
Thank you for your reply. It does not help. I think what can be said for sure is that it is not related to the PC driver because the behavior is exactly the same when I try to copy something directly...
I have a problem with my 400ci: The output with the color toners (yellow, magenta, cyan) is working just fine, however everything that should be printed with the black toner is missing. By switching...