Also this thread is very very helpful to understand whats going on with the 6230
Kyocera ECOSYS P6230cdn/P6130cdn - Error 7002
and get also more info on the part number not given directly from...
Type: Posts; User: HOSTAKI
Also this thread is very very helpful to understand whats going on with the 6230
Kyocera ECOSYS P6230cdn/P6130cdn - Error 7002
and get also more info on the part number not given directly from...
where is the list ?? !!
Thank you for your reply !
On a KYOCERA ECOSYS M6230 the customer used non genuine toners and on the CYAN the lever broke . He forced it to release but no luck . He then applied more force, only to cause damage to the 519 gear...
I think its clear that I fixed it and did continuity tests, as I cannot get a replacement somewhere
https://youtu.be/61I8seU_nTg
continuity tests where done while I had the scanner moving manualy, to check if repair was done properly or it was anywhere miissing a bit as before.
No mixed lines...
I had this unit remanufactured 3/11/2022 and so far no problem . Still prints perfect but message appeared on the screen and beeping. How can I make it go away ?
You can see the repetitive line of 43-44mm
ricoh-3035-repetitive-line — ImgBB
And thats the previous drum changed in relation to the page.
You can see the old drum is carved .
Problem is that...
Thank you for the link !!!
Hi everyone ,
can the Lexmark MS610dn be connected any other way on a WiFi network other than the MarkNet 8352 802.11b/g/n (Part #: 27X0128) network adapter provided by Lexmark ?
Can any other...
Or I need to have the CD that came with the printer ?
So who has a link to download the Windows 7 (x64) drivers for the SP112?
Cause all I get from Ricoh is
"Microsoft Windows 7 (64-bit)
No matching software found for your OS."
Found this one too. Sticky doublex solenoid !
Any clues ?
I get this message when it tries to print in duplex mode.
Thank you !
Please delete post . Problem solved by unpluging the HVPS/LVPS connector ... and rebooting.
What can be done ? I have two E360 and at the same time I was in service menu in both machines. After power loss one machine powers on but is frozen the other one does not even turn on.
That would be the number 11 on the parts diagram
Parts Catalog > Konica-Minolta > bizhub C280 > page 16
Both of the Trays (1&2) have the same issue .
Could it be that the main motor is giving that pick up problem ?
Anyone have the Bizhub C280 specific parts diagram on a link somewhere ?
I have uploaded a video of the actual two paper pick ups I am talking about
Please see this and comment !
https://youtu.be/2u3UIhsaHBU
You see something sliping ? I don't.
I am facing the same problem on a Bizhub C280. I took out the paper feed units 1 & 2 to clean and inspect.
The clutches where found to be working (applied 24V and none of them sliped) so what could...
Hi there I try to download the DCCV1_51.prn but I get a login fail
Can anyone help ?
Thank you,
John