Search:

wat password u want to bypass?

yes...Bz 250 and 350 use DV 310 NOT DV 110.The drum also difference.Use DR 310 NOT DR 205 or 305.

for admin is 00000000.unless someone change it..for service mode is 9272.

Removing the HDD for analysis of an abnormality and then reinstalling it after turning on and off the power may result in no recognition of the HDD.To avoid a conditon like this, condust this...

maybe the pick up clutch..but see it first..

make sure also ur drum and developer (stater) is the right one..i mean it's different beetwen Di 3510/2510 and bz 250/350.

password 00000000 or 12345678.either one.

mechanical or electrical.mechanical u have to reset it manually.electrical u have to short the 2 pin at the back of the machine which said total and ground.

u still have this machine???

before u do all the os- b said, try shake the imaging unit 2 or 3 times first(black).sometime the developer or some said stater full in one side of the imaging unit that's make a gear hard to turn.if...

I'm agreed wit u Wagon..

make sure ur test pattern is put on the mirror corrrectly.sometimes it's cannot read when u put it wrongly.

try this one friends...but i dont know it works or not.but for the machine C 250/252 it's work.but the display to change I.U still there.

"Utility - Detail - Stop - 0 - 0 - Stop - 0 - 1.When...

heh!heh!heh!do u really wanna know....???

actually...I had settle this problem...it's take me two month to settle it..for ur info the ce password come before u can enter service mode,meaning u have to enter ce password first before u enter...

as u said...to get support info from them [hq japan] maybe it's a long long story.Even get it from my service manager.nothing work on me.actually i 'm from one of the konicaminolta branches in...

i know that the service password cannot be change.but ce password can.i cannot access the service mode before enter the ce password.Normally this ce password can be enter by technician in some sort...

tq...still can't get acces to service mode.make me headache..

tq...anyway.I got pretty job here...

Oh..I See..Well Tq for the info.any other way...beside become a dealer

hi there..try off the main switch while press and hold 2 5 mode and on the main switch.it will direct send u to 2 5 mode.Enter Dipsw 3 - 1 to 0.But make sure the problem must be settled down...

I'm agree.But to us when to find the solution it's comes to a damn thing.We cannot enter the service mode to clear the counter of paper jam, to check sc code etc.Any suggestion that can help w'll be...

For our country this machine to be slowing absolute model.Normally in this case this problem accured when the wire harness worn and contacted to the body.Try to check the wire harness of...

another thing that i want to suggest is try change your thickness setting to thick 1,2 or 3.and plain.sometimes it work for some type of paper.

how to register as a member for this website www.mykonicaminolta.com? anybody can help?

tq.