Search:

have you check firewall yet, maybe that block by firewall

they have 3 driver you must install that is driver scan, scan A, Button manager

use sim 24-4 to clear after maintain , i hope that help

you should looking on status printer that have document in there or not , if you can see that, that mean data have been transfer from pc to copy ready, maybe worng paper size , if you don't see the...

you can push a litte toner in dv and print (carefully not too much just 2 spoons again and again if that not good) when you have good quality so you run again 25-2 that will be better

lang thang tu vietcopy qua toi day luon nguong may bac nay we di :D

If some one need service manual sharp just msg for me or can fine some of SM in here

sharpvietnam.com they post it for free have look

as well we can share why we buy that what for ?

with option you want to use normally go with usergiude in this machine you can read that or in the CD

here some userguide from youtube

...

usually the MX-620N go with network card (that is default from sharp) they can use network printer , maybe check careful scan option install or not easy way to check that by press image send on panel...

don't worry , if this machines have been install the option such as scan they key option that go with this machine forever, if for any reason they machine have been change or lost so impossible get...

i don't know how can you lost that key...???, because when you register the option scan (example) the should be active and the key they give you buy email as well they display on the site you were...

i got one 1million copy still run well

must use network without network you can't not scan as well in pc you have to install sharpdesk, when you install sharpdesk it will automatic scan on your network have any photo sharp have scan it...

Fusing section low temperature trouble (TH_US)

cause

The fusing temperature does not reach the specified
level within the specified time from turning ON the
power relay.
Thermister trouble....

lúc này lên tay mò lên tới đây luôn ah ha nmc

check drum motor

L4-2: Drum motor lock detection
Detail: The motor lock signal is detected for
1.5sec during rotation of the drum
motor
Cause:
- Drum motor trouble
Improper connection of...

in your photocopy installed the OSA to intergation with Citrix Server

first of all i think you should return the machine to photocopy mode

Turn off the firewall or open port 21 for ftp scan file transfer data from machine to client, if this port have been use for...

that is they said but no one in this forum do that, or they do that but keep secrets for them self i have discussion alot in this problem but no solution to take over this solution

i have replace new drum+clean blade + dv so i want auto adj dv but without go into service mode so how come i adj as well reset the counter drum

first of all thanks all of your have been help me. I try every think i can but can't pass through the service mode, very bad result , all most Minolta have this problem, if technical set pass this...

i not understand what it the NEC version ...???

i will try that way you tell me and will report

thanks all of you, my man

if you swap NVRAM that ok or not but how can you reset the CE pass because on service book it asking to replace new MasterBoard but still keep the old EEPROM (IC3A) so i think the main key in that...

that way you only work with default pass, but when you forgot pass you can reset by this way , i still looking for the way to reset the CE password

i try everything i can but can't get into service mode