Search:

Tried all of that and same result. Put new main board and now recognizes toner. Thanks for the feedback!

Thanks for the advice, I will try it next week.

I've done a couple of 10.7 installs on C452/C360 and C654 with authentication and no issue. Just make sure to add the account information on the output selection on the printer features.

Bizhub 25 same as a muratec 25 something? Not detecting new toner cartrdige (put two new ones just to confirm), the machine is new, any ideas? Did a sensor check and TS1 has values changing, TS2...

Bizhub 25 same as a muratec 25 something? Not detecting new toner cartrdige, the machine is new, any ideas? Did a sensor check and TS1 has values changing, TS2 does not have any values changing. What...

All you have to do is make sure the ethernet cable is plugged from the copier to the copier port on Fiery, then set your copier network settings to DHCP and restart and Fiery should assign a...

Yes on both MAC and Windows

Does anyone know how to flash a T632 without loosing the kernel and base kernel?

I believe its a firmware issue and only affects when using compact pdf. Are you scanning ftp or smb?

Try swapping your clutches on the rear of transport section. They are located in the back of transport section.

Reflash your CF Cards to base level 10 then upgrade to version 30.

I have a 950 with FS528 - PK505 ... Customer prints out forms on 8.5x11R, double side, two-hole punch on top.

The copier will give a false jam at finisher J72-17 when you run two copies in the...

Change the speed to 10 half duplex on both the sswitch and copier. Also make sure you are the latest firmware on the cisco switch. For some reason or another this switch is notorious for knocking out...

First let me ask:
1. What type of switch are you using i.e Cisco? Do you have timeout session set on the switch to disable the port if not in use for "X" amount of time?
2. What speed is the port...

The rollers were replaced but never played with the solenoid. Thanks I will give it a shot.

Thanks. I forgot to mentioned the unit is program for sort on all jobs.

Have a 920 when copying or printing 11x17 sort mode it throws some of the sheets to the floor. Kind of flying towards the rear of the finisher as it comes out. Also when copying/printing 8.5x11...

Getting an SC-2301 and SC-5301. Swapped drum and fuser motor same problem Sc23-01. Replaced Printer Control Board and Dc Power Supply same problem. Getting all the voltages 2 (24v and 5v) on motors...

Go to the printer properties ---> Acquire settings and uncheck the auto. All bizhubs are defaulted with auto so after every new install you need to make sure to uncheck the auto to prevent the delay....

File Swap - Download ScanDirect_Pro.zip

Follow the link.

Go here and download the utility I posted.

http://copiertalk.com/forum/index.php?/topic/114-konica-72557272-scanning-question/

4. Please try to print the PDF file by using "Print as image" feature on Adobe® Acrobat. Will only make the file much larger and make the printing even more slowly. Update the FW to 80 higher and...

Go to user settings and change priority device from copier to printer. This will help out.

You need the optional HDD for the main body in order to print.

Download from KMBS site special firmware G11-06, this will correct your smb scanning on the 282.