Great thank you. I made the adjustments on Main-LCT1 but had to go from the default of 50 all the way down to 4. Seems like a large adjustment. Is this normal or do you know of any mechanical...
Type: Posts; User: Mike557
Great thank you. I made the adjustments on Main-LCT1 but had to go from the default of 50 all the way down to 4. Seems like a large adjustment. Is this normal or do you know of any mechanical...
Hello, looking for some support on an MX-8090N with an MX-LC13N paper feeder. When we print 11x17 we are getting a image offset of around 2mm shifted towards the long edge. It occurs from both the...
Replaced the whole drum unit, waste bin and used the yellow developer we had on hand. Took about 75 pages front and back to get the yellow to green. Good enough to start printing our user manuals...
Yes, I actually have an extra yellow developer and was planning on trying this before breaking down and buying a whole set. Thanks for confirming it should work!
Thanks for the information. Was planning on replacing the container as well and have one on order. Will all be here Monday so I will know if that fixes the issue. Thank you all for the help!
Yes I followed the service manual and confirmed the clearances and performed the recommended sims. I assume that is what you are referring to?
Thanks for the reply again! Okay great, I will give that a shot. Might just swap the whole thing out. I am the unofficial office printer and copy machine technician, along with my full time job......
Hello, thanks for the info! So I could replace the MX-5141N OPC Drum Unit and is it correct that the main charge unit is built in or is that separate? Also, do you know if there is any way to get...
Looking for a little help on our Sharp MX-5141N machine. We were overdue for color developer replacement, at the same time Cyan developer became depleted and started causing stripping on the prints....