Didn't mean to just take advice and run, although I might not be able to contribute much, the help I've been provided on this forum is appreciated.
The bizhub c203, ADF magically started working,...
Type: Posts; User: SavingMoney
Didn't mean to just take advice and run, although I might not be able to contribute much, the help I've been provided on this forum is appreciated.
The bizhub c203, ADF magically started working,...
Stirton.M those were incredible step by step instructions.
Thank you for the help guys, I really appreciate it, I will try to check the lower lift plate and the spring position first, and will...
I'm not a copier technician, but I am responsible for keeping the machines running, so I'm hoping to get some help with 2 problems I'm having.
Problem 1 is with a bizhub c203 that is failing to...
Hi Guys,
Bit of an odd request, but since the boards here are so active I figured I would make it and see what happens. I have a Konica Minolta Bizhub c252 with a finisher fs-514 that is not...
Tricky levers! I did indeed have them pointing down for envelopes. I put them set to paper and now the "ghosting" is gone.
Thank you rocky246, and thank you copytechman for the excellent...
copytechman: Thank you for the advice I was able to replace the second transfer roller and after the first page, the prints came out looking great for the first 10.
I'm still getting the "ghost"...
About a month ago, we had a problem with our c252 "ghosting" a little bit of the previous page on the top 1/2 inch of every page. Genius that I am (yes that is very tongue in cheek), I decided it...
UP and running! I can't believe I didn't open that door just by chance.
Thanks for the advice, now I shall tackle the finisher :-)
Hoping for an easy fix.
Our Konica Minolta Bizhub c252, tossed an error C1190 on boot.
I found a service manual that lists this as a problem in the finisher, so I popped it open and found the...
Thanks guys! 6 hours after the post I discovered setting the stop IU controller to suspend does NOT take away the message that the IU must be replaced, so I'll be looking into getting the reset...
Hi guys,
I've recently been saddled with the responsibilities of trying to keep my company's copiers up and running, despite the fact that I don’t' have any experience. It seems like these forums...