Was it the "Send" button that was sticking? Just curious...
Type: Posts; User: Jules Winfield
Was it the "Send" button that was sticking? Just curious...
In the OP's defense, he's a Ricoh tech. He's probably used to their backwards engineering logic.
Try cleaning the transfer cleaning roller...
I don't know about a silly location, but the dirtiest machine I ever came across in the field was in a hospital. Yeah...
Does your company sell refurbished machines? I would have your guy strip a couple of old copiers down to the frames, do a thorough cleaning, and put it all back together with new consumable parts....
It sounds like a dust ball or something worked it's way into the light path. I would try re-cleaning the optics...
I can't believe all the belly achin' I'm hearing. A little extra IT work isn't a big deal. In fact, I usually do a lot more than just copier and IT work for my customers. For example, I keep coffee...
Because if you shoot them they can't spend any money and spending money is the whole reason they exist in the first place.
No problem...
so.... did we ever get an answer to why the Like button disappeared or did this thread just get totally derailed?
The different toner cartridge model numbers are for the different regions the machine is sold in. For example, US toner would have a different TK number than say European toner. The printers are...
Which model printers are not being detected? Not all Kyocera models will be detected by the KX driver installation program, just the ones that program has drivers for. Some Kyocera models ship with...
My 4:20's at 6:30 (roughly)...
There isn't one, but thanks for the input...
i hate to say it, but you might be dealing with an engine board issue. Another thing to look for would be pinched wires in the drive section...
Is firmware up to date? I'd start there...
Cool, that's good news. I wouldn't want to start a frimwar without the proper weaponry...
Just for the record, I don't think your idea is dumb at all. A lot of other technical type forums have just the type of thing you mentioned. A lot of the forums for auto repair I've been to use this...
I had to order a CF card and reader in order to troubleshoot this issue further. 64MB was the lowest capacity CF card I could find. Will this be low enough to work with a 5200? Last time I dealt with...
Fasho...
Not even in the short run in some cases.
The toner cartridges are full except for the black, but there is still a little bit in there. I've tried two different USB drives, one was a 1GB and the other was a 512K (both drives previously used...
It's not for you to read while operating it, it's for the guy wiring it up to read while he's connecting power to it...
Hey guys,
I have an FS-C5200DN that is stuck at the Self Test screen. I hear motors running for a few seconds when I first turn the device on, but then it just hangs at Self Test. I tried...
FYI
It was either main or MMI firmware that resolved this issue. I'm not sure which as both were updated at the same time...
Do people still actually use Blackberrys? I would imagine carrier pidgeons would be a better alternative...