Search:

I had a customer that had two Ricoh 2554s that every night someone from outside their local network would send large print jobs to both machines. The customer would come in each morning to find all...

Thanks for your help guys. I found out that all that they will be using this printer for is prescriptions, so I can set the margins over and leave it that way. I set the page margins over with FRPO...

Thanks for responding BlackCat, I was just testing it on port 9100. I plugged my laptop into printer with cat5 cable. I typed !R! RES; Unit C; SLM 10; Exit; in the start of job string. I will attach...

I have a potential new customer that wants to print prescriptions onto 5.5 x 8.5 paper. the problem is that the PDF that their medical application generates is a letter size document and it prints in...

Thanks Tmaged, that's the one I will probably go with.

What is the best driver to use for client/server network? I usually go with the KX driver and leave the emulation on pcxl but it seems that the driver generates pcxl error pages sometimes when...

Thanks guys. Blackcat : I did see that document that you referenced but it shows instructions on how to configure it once you have an IP address in it. I can't seem to figure out a way to get an...

Do you have the admin email programmed in user tools-system settings-file transfer? I can not remember what error message that you usually get if you forget to put that in there.

Knoxville

I know that this is a very old post but I just want to add what actually fixed it in case someone else is having the same issue. Kyocera wound up writing some custom firmware for me to fix this...

Does anyone know where I can download the setup utility for this Wireless card? The setup guy put the card in and threw away the disk. The utility is not on kdaconnect for download. I called Kyo tech...

Just saying hi from Tennessee.

Most latest Linux distros come with Foomatic already installed. It uses a postscript interpreter called Ghostscript. You can use it to print to non-postscript machines. you can even use it to print...

Thanks for your response HPLEXKYOPT,
The model number is the new 4020DN. I was hoping that I could do something at the machine level. The customer : "Nothing wrong with my server, the old printers...

What has Kyocera done with all the parameter settings that were available in the older printers? I can't seem to get the line spacing to change on my prints. service stat page shows the new settings,...

I tried what you suggested but I think I have something wrong. On port 9100, since that's the port that AS400 uses, i set it up like this:
Start of job string: !R! FRPO L3,02;L4,10; EXIT;
End of...

Thanks Peterepeat, I will have to pass that info along to their AS400 guy. I understand the first option, but the second one flew over my head about the filter. Either way, it looks like it will have...

Hi all,

I have a customer printing a special kind of labels from AS400 and need to move the left margin over about 2 inches to print on the labels correctly. I think I can do a "start of job...