I don't have machine to try with another hardware. At my place is only the EXP260.
I figured out that the first failure is when CWS finishes search for servers, and after that Efi Fiery service is...
Type: Posts; User: Goshe
I don't have machine to try with another hardware. At my place is only the EXP260.
I figured out that the first failure is when CWS finishes search for servers, and after that Efi Fiery service is...
Yes this is the network controller, and after reinstalling the software and user software I am getting message
Assertion Failed!
---------------------------
Source code file
Source code line 124...
As I remember (I don't work for that company for 3 years) problem was caused by mailfunction on the input boards, or something like that - boards where cables are connected to Creo, and solution was...
Yes I am sure.
I used another other DVD disk and after waiting long enough SW was re installed.
Hello everyone, long time no see.
I need exp260 software reload procedure or harddisk replacement procedure for brand new hdd. I know that there is procedure described in the bus as pdf document but...
It is old thread but it will be helpfull
7229
I need Splash G3535 software.
I can exchange with software for CXP3535, Bustled Fuery 3535, X12 or service manuals
I have difficult to print custom size of 482.6x319.96mm on DC2240. The paper is stopped at the exit. Everything is OK on copy paper is coming out without problem.
I edit the paper tray attributes...
OK guys thanks
Are consumables(toner, fuser and drum) for these models same?
Thanks :)
Is your network controller connected to the machine properly? Check the cables, maybe you'll need to reinstall the NC software
I have Splash G610 with dongle on ADB port. Yesterday I reinstall it and get same message as CaboSanLucas. I found the Mac OS 8.6 with complete documentation but, there is nothing special about...
I need system software for Splash G610 or just installation of Splash Server app. I am getting message “The application ‘Splash Server’ could not be opened because ‘FIPLib PPC’
could not be found”...
I have Splash G610 which suddenly stopped to print. In Direct TCP/IP window I can see that the whole time the job is receiving and on customer's computer when the job had to be send it's restarted...
I have Splash G610 which suddenly stopped to print. In Direct TCP/IP window I can see that the whole time the job is receiving and on customer's computer when the job had to be send it's restarted...
Do you get an error code as 004-346, 004-347 or 004-348?? or machine just don't print?
Error 230 - CRUM Reader Board not installed or failed.
You are able to print to IP 127.0.0.1?! If you use "Xerox Network Scanner" just enter the machine's IP in properties
You can find few activation codes on this forum. I've tried almost all of them and they worked for dc535/545 wc pro35/55
Enter in tech mode (hold down 0 for a 5-6 seconds and press Start, password is 6789) in Diagnostic/Maintenance or in some submenu should be option Initialize HDD partition A
I resolved similar to this problem with changing the fuser. I had stripes(in yellow and cyan) as they were in test chart I used
Does anyone has experience with reseted or resetting toner chips for WC123? I am buying them but have problems. Some of them are not working on some machines. On other machines sometimes is OK for...
M24 is sister product with dc1632/2240 when we are talking about diagnostics. About Dc3545 edoc, check your PM
I have big problem with DC545 which stuck network scanning on message transfering. It is happening randomly, sometimes after 20 pages, sometimes after 50. NC have 384 MB ram and EPC have 380 MB of...