Search:

Yup technician co/owner

We believe this to be a lamp problem and I was wondering if someone else had found a replacement lamp for this unit, since through KM you must order the whole optical unit.

no does not, B363 an on.

4.1. How to install program
Use USB memory to install. For the details, see the Service Manual.
Conditions for USB memory which can be used for updating the firmware are as follows:
- Securities...

I believe its your hdd try formating

Thanks for reply I will try with the BH162.

I work for a KonicaMinolta dealer and have access to all the drivers but there is no Di-1610 windows 64 bit driver. I was hoping for a compatible gdi driver as we found some hp drivers for other...

I trying to find a gdi driver for this product a hp compatible driver.

hp 3330 prints very dark pages from leading edge to trailing edge except for about 1 inch along each side where the print is normal .The dark print has a wavy edge about 7 inches wide.

This question is for the board repair guys.I have at least 3 defective network cards that I would like to service myself since these are old and KM says they don't repair them anymore. If some knows...

on tray 1 and tray 2 we drill a hole on the top of the plastic protrusion in the rear right trays that push on a white arm then screw a small screw in the hole so it sticks out the rear about 1/16...

thanks for the info, worked fine!

Can someone explain the procedure to replace and reset the drum and developer on this model or if someone can email me a servicemanual. Thank you in advance

Just remove front cover of the drum and set the plastic flag in the down position, as the machine rotates the flag moves up and resets the drum.

Can someone explain how to reset the drum unit on this Panasonic copier

Does this model work simply by placing any size envelope in the bypass and from the envelope tab under word 2003 simply click print or must you indentify the size and input before printing? If you...

does anyone know what pcl 32 bit driver to use with windows 7

THANKS

After cleaning the scanner mirrors my copy quality is even but my copies are light.If I increase manuel exposure they are ok, is there a way to adjust the default exposure on this model. Please if...

Does any know how to reset the c20 toner cartridge ? The mylar was not removed from the developer unit and the client tried 2 new toner cartridges after a short time the machine reset the chips and...

THANKS

Does someone know the part number for the paper feed rollers in the paper tray? Thanks in advance.

Does anyone know where to get u9 (regulator) on the main board or a replacement. Once this part heats up the copier restarts every few seconds.

The tip of the lever that moves the shutter covering the AIDC sensors is broken and will not move the shutter as needed. (normally you may see p5, p6, p7, p8, p9) If not the magenta image unit is...