Search:

Type: Posts; User: Smee

Page 1 of 8 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    17
    Views
    2,803

    Re: Aficio MPC3500 PCU Charge Roller?

    Im pretty sure you cant buy them separately from Ricoh. Going through the manuals, they are part of the PCU assy and dont have a separate part number.
  2. Replies
    17
    Views
    2,803

    Re: Aficio MPC3500 PCU Charge Roller?

    Do you guys mean that soft rubbery grey crap that ive removed by accident when cleaning it then freaked out and fitted a new PCU? Is the grey rubbery stuff the protective coating?

    These drums...
  3. Replies
    11
    Views
    1,991

    [Misc] Re: Mpc2050 - mpc2000 - mpc2051 fusers!

    Dude I got the same problem, but only with MPC2000, 2500, 3000 fusers. I dunno why but I have 3 FULLY refurbed fusers on my bench ( lamps, thermistors, thermostats, fusing belt, pressure roller,...
  4. Replies
    17
    Views
    4,822

    Re: MPC4502 with screwed colour gamma after ACC

    Dosnt corrupt NVRAM do this? Or the memory DIMMS? Think thats where I'd start - seems like the machines not holding or storing the ACC info.
  5. Replies
    15
    Views
    17,058

    [Error Code] Re: MPC2500 sc551 sc553

    Im still going with the "replace the entire fuser" option as above. I have 3 MPC2500 fusers on my desk ive been mucking around with for a while, every electrical component has been replaced -...
  6. Replies
    18
    Views
    6,427

    Re: Mpc3002 with no feed from ardf

    Wouldnt the sensors at the rear of the df that detect the adf is up or down - the sharkfin ones - do this also? pretty common for them to break off....Im just not sure off the top of my head if they...
  7. Replies
    15
    Views
    17,058

    [Error Code] Re: MPC2500 sc551 sc553

    pretty interesting TonerMunkeh - thats exactly where Im at with about 5 fusers - I simply cant get rid of the SC553's, I know its the fusers as it dosnt matter what MPC2500 I put it into, within 3 or...
  8. Replies
    9
    Views
    10,811

    [Error Code] Re: Ricoh Aficio 1515 Add Toner Error

    Check the shaft that goes through the clutch that spins the bottle - its plastic and gets rounded. As above tho - first replace the PCU, then try hopper then shaft as its kinda difficult to get to.
  9. Thread: Pro C751 banding

    by Smee
    Replies
    1
    Views
    2,381

    Pro C751 banding

    Sounds like a pretty common problem on this machine - Anyone got any fixes or experiences with this? I know the dev tanks are now on its 4th or 5th version, still seems problematic - and im convinced...
  10. Re: MPC305 Colour Registration out at 1200x1200 DPI Only

    I agree with the ITB motor, it cant be the laser as these machines have 2 - 1 for the K and C drums, and the other for the Y and M drums. I dont think they would both fail at the same time, and I...
  11. Re: MPC305 Colour Registration out at 1200x1200 DPI Only

    Heres some samples...im going with ITB motor seeing as the machine slows down for 1200DPI...If it dosnt it would look erratic like these samples.
  12. MPC305 Colour Registration out at 1200x1200 DPI Only

    As the title says, Im working on an MPC305 with bad colour registration ONLY at 1200x1200 DPI. When printing at 600 DPI its fine, when printing the calibration sheets they are all fine except on the...
  13. Replies
    4
    Views
    596

    Re: MP3351 loud squeak

    Ive had something similar on a MP3350...when looking at the machine from the back with the cover off, there is an idle gear where a pulley runs over it in the lower left corner - near where the PCU...
  14. Thread: double-sided

    by Smee
    Replies
    13
    Views
    5,065

    [Jamming] Re: double-sided

    I dont want to hijack this thread, but it sounds very similar - maybe the same problem - as posted in this thread I started -...
  15. Replies
    19
    Views
    4,910

    Re: Interchanging Fuser Sleeve Assemblies

    Im with Zaxxon - always used D144 4046 in all of the 02 series. Never noticed any difference....only because I carry 1 refurbed 02 fuser in my car - easier than carrying 2.
  16. Replies
    6
    Views
    2,511

    MP2550 - MP2852 crinkling paper

    I see this everywhere with this series of machines - right from the MP2550 to the newer MP2851....they all seem to intermittantly crinkle the paper. Like the paper creases before the fuser, then the...
  17. Replies
    9
    Views
    1,025

    Re: Lighter stripe on edge MP C2500

    When the yellow PCU was replaced, did you re-fit the brass bushing at the rear that holds it together?

    Ive seen something very similar that was caused when the tech threw it away.
  18. Replies
    24
    Views
    15,089

    Re: MPC4503 and 5503 paper curling

    We must get different bulletins from you guys...havnt seen that one. Im gonna give those SP's a go, cant hurt. Will update with the results!

    Thanks!
  19. Replies
    24
    Views
    15,089

    MPC4503 and 5503 paper curling

    Hey guys, Im seeing paper curling a lot on the new 03 range. So far the fix is to put on the modified paper exit trays so it stacks nicer - but it dosnt stop the paper curling.

    Before anyone says...
  20. Replies
    10
    Views
    3,388

    Re: C2550 Torn Transfer Belt

    Going off topic but I completely agree with Jomoma - think ive only replaced one belt, replaced heaps of duplex junction gates, and a heap of PCU's for squeeking - never have worked out what part of...
  21. Replies
    15
    Views
    5,266

    Re: MPC 305 Fuser Gears

    Ive seen it 2 or 3 times...think its a white gear thats stripped?
  22. Replies
    23
    Views
    2,981

    Re: Printing problem on MPC7501

    Thinking about this a bit more, and this is a long shot but check if Extended Tray Switching? (I think thats it....extended tray something) is off in the printer menu. Again we used to turn it on at...
  23. Replies
    23
    Views
    2,981

    Re: Printing problem on MPC7501

    First thing I do on these problems is turn off Auto Continue - we set it to immediate when runup so if there is a mismatch with one job it will print the others...id turn it off, print and see what...
  24. Replies
    6
    Views
    833

    [Misc] Re: Detecting Users Printing on RICOH MP3350

    lol ive done this! Only took it a step further and took a pic of him using it when he shouldnt be, then put it on his desktop background - moved the camera to see his expression when he started up...
  25. Replies
    10
    Views
    1,478

    [CQ] Re: Mpc7501 itb unit dropping toner

    Im with Turbojetboy...they ALL drop toner! But are you sure its from the ITB and not the PCU void? Between the dev tank and drum? Dont think ive seen the belt causing any problems.
Results 1 to 25 of 178
Page 1 of 8 1 2 3 4