Gotta old PT cruiser, I complain about it but it gets me around n' the seats are comfy n' the stereo is good. Although the lack of cruise control gets me into trouble considering I average 210-250...
Type: Posts; User: JtheCopyGuy
Gotta old PT cruiser, I complain about it but it gets me around n' the seats are comfy n' the stereo is good. Although the lack of cruise control gets me into trouble considering I average 210-250...
They feed 1 at a time, they come out face up (already changed it so it wasn't slipping into the duplex to flip over)
First works just fine, then every one from that point does this reverse S shaped...
Ok I have a problematic KM6030, it gets used like crazy. Last time I was there it was 52K copies in 20 days and it's a school so that means like 15-17 actual days of work.
It jams a little more...
Error C-6702
AGC abnormality.
AGC counter overflow
Involved parts:
CCD board (CCDB)
Exposure lamp (L1)
L1 inverter (L1 INVVB)
Scanner motor (M2)
Annnddd I feel like an idiot.... found a TAD on it:
TAUS0650433EN00
Statistics
Last Used in the Contact Center: 11/5/2009
Times Used in the Contact Center: 8
Views: 375
Related to...
Having the same issue... this would be the 2nd machine that has done this to me. Last one was a NEC IT3530 (so same thing as a Bizhub 350). LAST time I did firmware update, total wipe of system,...
Guilty Party was F202, a fuse that is supposed to be for the ADF. Swapped and that was all it needed!
Thanks for the help Stirton!
Ok, so I checked continuity for all the cables n' everything works great. Just went through and started testing fuses and found 1 that was dead, replaced and testing, will update.:D
Have you tried just a trouble reset?
Any progress on this? I have a similar issue. Had a C351 with a 603 finisher, finisher stopped working, another tech determined it was the port and the port was too big of a problem to deal with...
I've run into this, we tried several fixes including different firmwares. Ended up being the wire needing to be redone. Here is the bulletin for that cause yes... it is a PAIN to locate those tech...
Ok, the customer reports that this issue shows up with PRINTING or COPYING so I'm thinking it's not an issue with the glass/ADF. But I could be wrong.
Here are the examples of 1. the issue and 2....
Ok, tried that and all 4 came out solid with no real obvious defects in the color.
I'm doing some more testing this afternoon to see if a specific kind of job causes it.
Next idea is just a PM to...
Hi guys this one is seriously stumping me.
C3225 that works just fine 99% of the time. And by 99% I mean literally out of 100 copies in the shop I got 1 with this error. We get colored streaks...
The Genuine Lost In Space B-9 Robot - Hammacher Schlemmer
This is the 6 1/2-foot, animatronic remote-controlled version of the B-9 Environmental Control Robot from the classic Lost In Space...
Good lord your "Work" Santa gave you 400 bucks worth of gaming gear? Where the hell do you work n' are they hiring? :P
N' I can feel the pain on the cold bit. Midwest here n' 2 weeks of...
Ok, called NEC and we've replaced the 15 degree sensor, adjusted it. Replaced/aligned the front magnetic sensor (scanner closed sensor), replaced the original size detect sensors (again). Did a RAM...
Customer has a KM5050 and they complain of "accounting being slow". We've updated the Firmware and formatted the HD and restored their user data. The odd thing is it seems to be a gradual issue. ...
stevee - I've run into a similar issue where 2 inches from the edge of the paper the color is just washed out or almost negative. This shows the most during a Gradient print. What the issue was for...
Well I've reset the white plate repeatedly to make sure it wasn't picking up any edges. I'm going to let it sit over the Thanksgiving Weekend and then go with a CCD and do some more...
Ok...
Installed this machine at a customers, week and a half later it pulls this "Original left on glass" anytime you put anything into the ADF. If you lift it just enough to flip the 15% and open...
I would replace the IU first and test the machine out. I've had a string of bad IU's that we THINK got sat on their side in transport, after a few hundred copies the back 2 inches of the IU gets...
Don't know if it will help at all but I know that the 30/40/5050's LCT are notorious for the paper feed tray having clips that break and cause a variety of issues, such as skewed paper through the...
Ok, well we updated the drivers for the customers computers, reseated the RAM on the main board, the DRYDIMM on the main board, and the DRYDIMM under the panel, blew it out with some air and... no...
Got a customer who has twin Km5050's sitting in two separate offices. One they have 0 issues with, the other gets a regular CF620 c-code, requiring the machine to be powered down and rebooted.
Now,...