Search:

we have 3 mp8001 machines and we have strange problem that we have paper jam only on 1 side copy and no jam if we copy in duplex .

the jam we have is SP7504 12 on 1st tray , i changed the rollers...

I have cut in one of the cables in the electrical side , I did a mistake and remove the cable connectors from the electronic PCB specially IOB2 without mark it . I tried to reinstall them but I...

i have light copy in the pro 1106 , when i do force toner supply the image became good for about 500k copy the start becoming light , also when i do toner supply i can found developer leak in the...

not from long time ,also i use another tone340713407234073r lot but the same , the problem that the toner did not reach to the top of the Toner Recycling Ass'y , pleas see photos

i have a problem in 2 machines mp7001 and 9001 the problem that the toner blocked in the PCU at the end of the Toner Collection Coil to the Toner Recycling Ass'y ,this blockage damage all the pcu...

what i need to replace or what i need to do to fix it

machine mp 6001 , while copying or printing no image or some of the image appear and some times full appear , SC 230 appear .

i am still suffering This problem happened mostly on the 1 side copying and it damage the original when we try to run 2 side the problem became more less

Is there is way to reduce the speed of the...

Hi , i have continuous jam on document feeder of MP6001 , i changed the separation roller , belt and take up .but the jam still .

i attached jam pictures .

Hi, i have paper jam specially on A4 size in the fuser after 5 to 10 pages i have the jam , the jam code is 38
when using bigger size like A3 the jam became less

I have another machine in the same site running fine , I did swap and try for the stripper unit , the problem move to the other machine so the problem in the stripper assembly , I install new...

sorry , here is the picture

What is the right setting to print Conqueror Paper or texturized paper on the pro c900 in good quality with well toner fill up into the solid area or to have same quality as in coated paper .
Thanks

Dear all , I have jam on the fuser on ricoh pro 1106ex the jam exactly as in attached pic ,it is on the hot roller strippers I replace them but still the same jam .
Please advice

no it starts shift from the first page , but i see that the shift is less when i do double side scan

Hi , suddenly the pro 1106 ADF start to shift originals , the shift is not the same also there are skew . the shift happened on the original glass , please advise

Dear all
I have pro 900s, I tried to move the LCT-MF but I forget to disconnect the connection cables so I damage the flat cable connector I switch on the machine and have SC 161-01 in the...

Is there any difference between Ricoh pro 720s and Ricoh pro 900s in the image quality , paper jams and fuser oil streaks and problems . is the problems that in pro 900 can be less in pro 720...

Hi all
I have 5 mp 6001 and 7001 machines , I looking to improve my work and the speed so I am planning to have pro 1106EX or 1107EX .
Do you think that I am right , what about this machines...

thank you all for your valued information , so what ricoh model you suggest , i am planning to do full color printing in glossy paper between 90 and 300 gr

Dear all
I am planning to move step to the digital printing , I would like to buy Ricoh MP C7501 , is it the right step , please advice about this machine the cost , the quality ,,,,,,,

i connect it to PC and format it as FAT , and every thing came back fine , thank you all

FAt or NTFS

the problem that i can't go to the SP menus to do the HDD format , I just can see the main menu

Hi , suddenly while the machine was working normally paper jam happened and the machine freezes as in the picture attached the is no ready or pleases wait or nothing written , please advice