We had to adjust the tension on quite a few machines but just recently KIP released a new style sensor.
Type: Posts; User: prasad
We had to adjust the tension on quite a few machines but just recently KIP released a new style sensor.
Try this settings:
Lead Edge Erase = 0.
CPM = Down
Thick BK Mode = On
Fusing Air = Max 7
Hard Paper = On
The problem is resolved by loading the system software.
11506 unexpected logical connection loss with the print engine Mainnode Power & Control PBA, 22PBA01, Ethernet cable defective Error message 13521 - PEMOUTMO 13M89 speed error Start the SDS test of...
CFD00 code sending email. Replaced MFPB, Memory, NVRAM.
The problem is resolved by replacing the Interface Cable P/N - A0EDN14800.
Try running stablization and then run a copy. If the 1st copy has this mark and clears out the 2nd onwards. I had this problem and ended up being a HV. Poor cleaning after stablization due to...
Data reset is done and Yes! I have an open ticket with KMBS.
Interesting, hopefully something that relates to my copier. I also replaced the memory while troubleshooting.
Yes.
Replaced MFPB, NVRAM, PRCB, CCDDB, DCPS, Flash Firmware, code out on bootup.
Carry out your transfer belt Mod. Also reinforce the bracket.