Search:

Noblesse oblige and I thank you for solving it.

Hank

Have to pay for it..... Is it a Just Manuals interlock?

Customer complained machine stopped to a sudden halt with strange sound as soon it was turned on.
Opened the front door and could not get the cartridge out.Send me the complete printer to see what...

Find your replay quite interesting.
Have you actually measured by any chance what is the grid voltage increase over the life time of the OPC ?
I have read +785Volts at start up but never though of...

Would like to know if besides Xerox Workcentre series 7300 there are other makes and its models using the method of continuous replenishment of developer.Experiences collected and...

The TN360 and counterpart DR360, as with other Brother models, requires a bit of care during cleaning and refilling process. Couple of pointers:
1. Do not resuse toner from the cartridge despite the...

It appears in the diagnostic report of a customer. That`s all.

The error it throws is 0A567C2B
Any clue?
Cheers

The part number and description is:

40X0120 Fuser Wiper Cavity Cover.

Firmware data does not appear on any of the pages the printer provides.

The error generated is 7410 000 417 which customer relates to possible toner cartridge fault. Cartridge TK332 however found with substantial quantity of toner. Unable to see the machine.
Could...

Yes, I know, I looked it myself and found nothing. Using your famous WAG expression Blackcat, it appears to be related to Formatter/DC Controller ping pong. But....

Many thanks, you´re a prince.

My printer Oki B6300 shows error 0003-205.
Please advise known reason.
Thanks

The OPC drum has, on the drive end ,an additional gear used to move the transference roller. The additional gear is unattached and couples the drive gear by way of very fine radial teeths. Make sure...

This side of the woods I find the CC364A toner cartridge which is low yield and the CC364X high yield, both used in the P4015 . By design the CC364X will not normally run in the P4014, only the...

ugh.What link?

By design, magenta is at the bottom of the pile of cartridges which forces mirrors in the laser to look up and collect all the dust possible floating around the inside of the machine. The surprise...

Suggest you check the paper menu. Make sure the machine is not set for heavy paper > 130gr/mt2 ,better yet, put everything back to factory setting and try again.
Hank

Possibility: There is one round contact on the left side of the cartridge that looks like a oversize pin and should connect to the machine when cartridges are inserted.The contact provides bias to...

Just look what can be found when the toner cartridge stucks.

Enrique Stura

Paul
It is a widely used cartridge and while I do not know the 1552 machine let me see if I can help by providing options issued by Summit. One is mechanical ,the other is via panel.
1. If the...

Please advise if the cartridge carries number Al-100DR

E340/E342 Drum Units
Reset OPC counter .
Printer Off, with the printer still off,press and hold the "Select" and "Return" buttons. While still holding the buttons down, turn the printer back On....

If the Toner Cartridge on the machine was remanufactured, it is possible that the OPC replacement was made with one lacking inserts inside the substrate. Such a lightweight drum can vibrate with a...

Except for reset of OPC counters in some models (E/X 342, E120,etc) there are no tricks available for Toner cartridges but to change chips.