I think the biggest problem with us tech's is that we have to fix so many probelms in the day, made by sales man , we tend to forget to fix the problems we have at home.
I for one just go out for...
Type: Posts; User: Brave Hart
I think the biggest problem with us tech's is that we have to fix so many probelms in the day, made by sales man , we tend to forget to fix the problems we have at home.
I for one just go out for...
It is your memory that is causing that, rub the contact points with an eraser, or replaces it. We get that for some reason quite often here
Taking a shot at a 3rd attempt on the 14th of November, maybe this time it will be a success.
Two things that a copier tech is good at is drinking and meeting woman, so I guess we are doomed to...
Hi there!
Base: 019-11733-109
Sep pad: 019-11831-100
Feed rollers: 035-14303-001
Cores 006-11332-009
Hope this helps you.
Hi guys!
Please help!!!
I have an Aficio CL7000 the only thing it does is all the led's are burning on the control panel, nothing else happens, I have changed all the boards and still nothing...
Our speed limit on high ways are 120kmh here.
I hardly ever get tickets on the high ways, my problem is the suburbs as the speed limit is only 60kmh, try and do eight calls a day driving at that...
Damn you guys must drive like driving miss daisy’s over there, I average about 2 a month and that is if I am having a good month. With the new trafic point system starting over here by us soon, I...
Just make sure that the pin in the front that locks the dev unit is still there, if it is missing it causes the dev to shift forward and then it does not turn.
Check your machines firmware, there was a bulletin out for firmware on that problem, you will also have that problem if you use none OEM toner, so make sure of that to.
Hi there!
Try and replace your thermistor, cleaning them does not always work.
If you still get the problem check your firmware there is a RTB out on SC 542 as I can remember. If that is all ok...
Hi there.
At the front and back, make sure that the corona wire is threaded correctly into
the grooves in the end blocks. I had a SC 300 the other day were it was arcing against the grid.
Worhsop Mnanagers?
Damn it amazes me they are always so quick with sarcasm but yet so slow with solutions.
Think about it! 20 machines in a short distance from each other and only 1 with the...
We have a help desk so if the call is logged it means the help desk could not resolve the problem and a tech needs to go out.
But still we get silly calls like damp paper or tipex on scanner...
It is important to Install all three new thermostats together as a set.
There is a bulletin out on SC 555 chech it out RTB21 RB246021
Old part number New part number
AW110040 ...
Clean your transfer belt rollers they get dirty and the belt slips, causing the registration too to fail. I have had this problem.
I had the same problem on the same model number, never found the problem behind it, I changed everything inside the fuser that could be changed, even the screws with the lock washers, and put normal...
We run boot stock and find it very help full. Especially in closing calls faster, once a tech comes in for parts he wastes at least 2hours plus. Sorting his parts, chatting to fellow staff or just...
My machines still starts to background around 80k after pm.
With all the RTB's and all.
Hi Guys!
I have a MP1100 and it won’t keep its toner density.
It started after its first Pm service and have not been the same since, I have replaced the TD sensor the ID sensor and Drum potential...
Hi There
SC997 you need to install more memory or just make sure you have
Installed it correctly.
Hi there
Here is the parts manual for the GR3770 hope it works. Other wise i will have to mail it to you.
Hi there.
In the middle of your master removal unit is a sensor check that there is not pieces of master wrapped around the rollers by that sensor.
The drum not going back to home position...
I don’t care much for this Rep power. I have had some damn good advice on this site from some guys, that’s all that matters to me.
Hi Jeremy
The problem did start when you changed your black drum in to a colour drum. your black drum Ink Cartridge Set Switch PCB has 5 sensors and your colour PCB has only 3 sensors.
So...
Hi guys, just to let you know it was a damn broken wire in the middle of the loom. Heavens knows how it broke there.
The only thing now it won’t staple at the top corner of the page if I select...