Hi,
I was getting C2557 all the time, the machines was trying to add some black toner but could not reach the normal procent. it show 0,32%
I went to service mode and add toner manually (10 times)...
Type: Posts; User: Imsdal
Hi,
I was getting C2557 all the time, the machines was trying to add some black toner but could not reach the normal procent. it show 0,32%
I went to service mode and add toner manually (10 times)...
Hello,
I hope somebody can help me with this issue.
I have a EPSON TM C3500 that show Nozzle Clogged and Print Error 21 I had the printhead out and i cleaned.
But Print error 21 remains.
...
I have a Toshiba e-studio2555cse that show Refill paper on the Large Capacity Feeder model: KD-1031.
The tray that lift the paper seems to go to the other direction (down)
I have look the motors...
Hi.
I have this Canon IPF 710 that show error 03130031 2F2A.
First came the error 03130031 2F1F and I took out the purge unit and I fix it, but after that came the error 03130031 2F2A.
I cleaned...
I have a C253 that control panel doesnīt work, I have a control panel for a C203.
I know is a differents part nr, but can i use it on a C253.
Does anybody know what is the main reason why they have...
Hello.
The problem was that solenoid that activate the paddle.
It was some glue on it so i removed it and put some tejp on it and now it works.
Thanks for all the help
Imsdal
I have this C353 that jam just outside the finisher.(FS-519)
Itīs jam because the paddle that is in the holder dont turn around to the home position and stop the paper to come out, this happen only...
Hello
I Have fix the problem.
What I did was that I upgrade the finisher by itself when you insert the USB you can select:
Controller, Printer, ADF and Finisher, I choose just finisher.
...
I have this C224e with a finisher FS-533 that show error C-155 after I upgraded the firmware with version GD8.
In the process the display show Finisher N.G.
So, i unplugged the finisher and I...
Hi.
I cleaned the disk, before I installed the new roller encoder sensor and the error came up in the display.
Then I install the old one and itīs work.
What I am gonna do is to clean the new...
Hello.
I have change the roller encoder sensor and the machine showed the same error 81.01.
I was very upset so I cleaned up the old roller encoder sensor and i put it back to the machine and the...
HI.
Thanks I will order the sensor and I will get back to tell you how it went.
//Imsdal.
Hello.
I know this is an old question. But did you fix the problem.?
I have a designjet 500 that show 81.01 papermotor.c 1587.
I dont have the parts to change..but what can I do before changing...
Hello.
The Machines are not here in the shop at the moment so i canīt tell you if your suggestion help.
I will do that as soon as I can when i visit the cutomer.
Thank you very much for the...
Hello there.
Have anybody had problems with this version K9 and M1 firmware with the bizhub e-series.
I canīt update the FS-534SD and the JS-506, when i start the update the display show N/G in...
Hello
Does it show on the display "calibrating" cause if the machine show that and it takes too long, it might be the laser that is dirty, just clean it with that tool from the paper tray.
...
Hi..
Have you try to add the web (IP nr) in the Compatibility View settings under Tools in your browser.?
Imsdal
Hello
That error has to do with the HDD, have you try to format the hard disk, upgrade or change it for a new.
Good luck
Hola.
Que clase de paleta necesitas? Este es un foro de tecnicos de maquinas copiadoras e impresoras, no puedes dejar una pregunta sin haber explicado de que se trata.
Ahi muchos tecnicos de...
Hello there.
It was the SSD card.
Hi.
I had call today that a C224e showed the error code FA-14, the customer turned the machine off and after that the machine started to reboot all the time just show those 2 blocks at the start...
Try this
Hi.
When you are installing this machine from the start you have some questions suchs as country, language etc.
When you get where it show what do you want show on you start screen there is...
Hello there.
I have this issue with a bizhub 3320. My customer just want to use the machine as a fax and copy function but I get this message on the display.
"SMT- is not installed", call the...
Hello
When you insert the drumunit into the machine the number 9 on the picture must open and if doesnīt open it wont come toner inside the unit and will alarm the you need toner and the springs...