white line comes (matter doesn't prints) in print in one fix place in copy. this is like straight white line from start to end.
i've checked drum unit, toner supply, laser (checked from other...
Type: Posts; User: regalcopy
white line comes (matter doesn't prints) in print in one fix place in copy. this is like straight white line from start to end.
i've checked drum unit, toner supply, laser (checked from other...
Dear All
DCCS50 Problem - Network Controller disabled
this appears when a print is sent to printer.
thanks
thanks for replies.
machine had some wiring short.
i checked the wiring in fuser unit. now machine is working.
Canon ir400 shows e001
i've changed the thermistor, but error remains same.
Any help please
my xerox dc12 restarts while printing and jams in the fuser unit.
please, any help would be great.
this ir400 print - 1 side ok
2 sided prints - paper jams after passing thru drum on back side print.
checked transfer & replaced but the same problem
any help please
u mean iot board, or ac driver board ???
tx
i need help on Xerox DC12 error 03-317.
thanks in advance
i am facing this error now. whats' the error detail.
thanks.
front door when pushed in - gets connected with the spring held rod - the rod is connected at the back to a switch - the switch sends signal - y/n.
check if door is properly locked. manually put...
Write fault in image memory
thanks for the concern. i opened the clutch assembly and cleaned the clutch which was dirty. one of the gears, i found on clutch assembly looks little out of threads. i could find only one clutch...
while the registration problem is there, i observe black light brush-type patches in middle of copy (like drum cleaning blade out copies). clutch cleaning i have not done . pls help
what exactly is ibt reflection patch?
i have cleaned the ibt surface & the rollers inside the unit, 1 silver colored patch on ibt, sensors.
changing the values as mentioned is not showing good...
Hi,
xerox docucolor12 : Yellow color registration is out & sometimes all colors fails to register. I have cleaned the ibt assy in & outer side. 200 copies came very fine but later same problem...
3 buttons on panel.
copy-fax-print
press the print option-reboot from panel (screen options) then enter set up while machine boots.
service mode Copier>Function>Clear>pwd-clr then go to additional functions and try to reset m/c. not much into these m/c now.
Connect to the m/c to com, via cables provided. Then go to download mode in the m/c. Check the desired operations & execute
Thanks for the reply
i have rechecked the motor & thermistor on other machine. On other machine its working fine.
Few days back iot board had trouble, which i rectified, is the error possible...
i get error 10-355 & 10-356 on my dc 12. i have changed the fuser motor(retract), thermistor. still the same problem.
thanks
I have problem with xerox DC-12 error 10-355/356 , I put new fixing unit, still the same.
thanks
KIP 3400 (Oce 7150) gives error E0 65. Can i request for some details.
thanks
Oce 7150 was giving error E065. Changed the web roller.
How to reset the fuser. What is the procedure. Any help will be great.
Thanks.
I have ir c3200, the surf board is faulty (part no. Fg3 2729). Surf board is like an internal small ufr board. My place i am not getting any service support.
I can't print to the machine now. How...
Thanx for the reply
Can I print after updating the system. My Surf Board has become faulty. What are the alternatives available.