It would be replacing the 9500 so letter to ledger paper sizes, no finisher. Its pretty heavy duty printer, 200k/month duty cycle. No mac or air.
Type: Posts; User: wester
It would be replacing the 9500 so letter to ledger paper sizes, no finisher. Its pretty heavy duty printer, 200k/month duty cycle. No mac or air.
I don't think they have preference, but they have several other large HP's, so I guess HPs would be the preferred.
I have a customer that is looking to replace their HP Color LaserJet 9500hdn, Any recommendations?
Can someone tell me if the wireless LAN option code 416572 and code 417493 are the same? My customer has a MP C4503 and they want or would like wireless connection. Maybe a recommendation of an...
Thank you thank you
Could someone help me out with a part number(s) for the rear cover and the right side door for the paper bank PB 3160? Thanks in advance.
I've got a NVRAM on order and we'll see what happens. Thanks.
Well that doesn't appear to make a difference. I wonder if I need to replace the nvram even though there was nothing wrong with it in the first place. Also this machine didn't have the encryption...
I am also getting this message. It started with a controller sc, so I sent the controller into Hytec and they sent it back no problem found. I installed it along with a new HDD. It has original...
Thanks
Hoping someone can help me out with the part number for the exit tray lift belt (rear) for the SR3070. Tanks in advance.
Solved. The error code was in the lower left of screen. Code 116-365. To reset, power off. Press and hold the 4, power saver and cancel buttons while turning machine back on. Continue holding those...
I am not very familiar with Xerox, I have a customer that has a WorkCentre 5335 and it suddenly displayed "a system error has occurred turn off and on again". They and I have done this to no avail. ...
Please disregard, I've got it.
Looking for disassemble procedure for the fuser. It seems it is locked up and jumping gears.
done
Well that didn't work. He had PCL 6 universal in, we changed to PCL 6, no go, then 5e still same. He put PCL 6 universal back in. Its only on the one document (preg. report) from Allscript and...
Thanks, I'm meeting with their IT guy there later this morning and will let you know.
At a doctors office, just certain documents from "Allscript" seem to get hung up, ie. out of a 6 page document the firstn3 pages come out quickly, then "stalls" out, says processing then after up to...
Would someone have the latest firmware numbers(versions)? The firmware history would be nice. Just want to see if my printing problems are related to the firmware. Thanks in advance.
Thank you.
More like 2" by 5/8"
Could someone help me out with a part number for the stapler upper mylar for a SR 3070 - D585. This would be on the stapler itself.
Thanks in advance.
Thanks that did indeed take care of the error 59.F0. But now the prints are blank. I suspect maybe a connector from when I disassembled it back a few months ago. I will disassemble, retracing my...
Thank you I will try this!