Search:

Have you tried taking a network data list print, then switch on DHCP reboot and let the machine pick up all it's network settings. Reset the ip address to the original address, turn off DHCP and...

You may have a dead PCB in tray A or B.

On newer machines this is caused by a communications error with the finisher

Looking for fm3-4352-010
I'm looking to get hold of some FM3-4352-010's. They are the drum separator/claw unit from a Chinese 2270 to 3245 series drum unit. We want to evaluate these units to use a...

Perhaps half a dozen or so would be ok, how much would they cost with shipping to the UK?

I'm looking to get hold of some FM3-4352-010's. They are the drum separator/claw unit from a Chinese 2270 to 3245 series drum unit. We want to evaluate these units to use a large customer, but Canon...

2220 is a 2270 with a 2200 display, or is it the 2200 with the 2270 display? Pointless machines either way!!

If you press the "123" key for the counters, then hit device configuration. You should see UFR and PCL in the options, if not you need a print kit - this is a MEAP application.

Some older 2270 series machines will not display a scan tab without a "p", "n" or "h" bootrom

Is the drum guard swinging up out of the way when you raise the transport section? Is the fuser entry guide clipped in properly and going to the right position as you lift the transport section?

Does it have a print boot rom? Is it a 3025 or 3025i? Only the i models have a print rom as standard.

P-SENS-P should be cleaned every 30,000 images. 1 image per black copy, 4 images per colour - doubled for A3:(

There is a modified cover to stop toner falling onto the sensors.

58/6800's are no place for the faint of heart!!:eek:

A good 3 to 5mm lead edge deletion works wonders too! Set Blank-t to the same as Blank-b (usually 98ish)

More details please!!