I had a 450i rebooting. Replaced the cpu board did not fix it. Replaced the SSD on the CPU board, it fixed the problem. The recover tool would not work on mine or firmware with the rebooting issue.
Type: Posts; User: minoltaed
I had a 450i rebooting. Replaced the cpu board did not fix it. Replaced the SSD on the CPU board, it fixed the problem. The recover tool would not work on mine or firmware with the rebooting issue.
Turn off dial tone detection in the service mode and see if that helps.
Did you try to turn off dial tone detection? I have seen this cause issues.
Has anyone started updating the Konica Minolta equipment from the attached bulletin? If so how are you tackling it. Any issues or struggles? Just want to see how other dealers are approaching this...
Any fix for this yet?
3.23.34 CD3A0 (bizhub C658/C558/C458/C368/C308/C258)
(1) Contents
Trouble type CD3A0: Counter error
Rank C
Trouble detection
condition The total counter values provided by the MFP board and the...
Was this ever fixed? And if it was what was done to fix the machine?
Did you find a fix for this?
Could be the charger but I assume you replaced with a new drum. Had some of these in the field leaving background on the backside of copies. Turned out being non OEM toner causing issue. Check to...
Thanks guys. Yes have already done initialize and stabilize. Replaced bk drum. Ended up being the MFP board.
We have a c550 that is exhibiting some weird quality issue. We have reseated the memory. Half tones look good. Image on transfer belt matches output. Replaced 2nd transfer roller. Swapped drums....
Thanks for letting me know.
Was this issue ever resolved? And if it was what did you do to fix the problem?
Anything that says Kyocera.
I would start with the memory. Some of the older color boxes would do some weird stuff. Memory always fixed the issues. Sounds like some things I have seen in the past.
Been working on Km for 20 years. We sell both Kyocera and Km. Km all the way, if it was up to me all we would sell is the km products. Kyocera products are cheap and pieces of junk!!!
Looking for experienced field tech. Factory trained on Konica Minolta and/or Kyocera copiers. Production a plus but not required. Growing company needing top notch individual to join our service...
Sounds like the registration clutch on the inside of the right door.
30363036 but they disabled it.Used to be able to clear the main count with that secret password.
Lower fusing roller.
Replace the one ways.
Local company looking for a experienced tech for kyocera or minolta. Connectivity a plus. Please reply if interested.
The bk chip is different from the colors. You have to take off one cover in the the front of the dv by the toner auger. And the chip is behind it.
Yes check the charge grid.
Merry Christmas!!!