I have a 6055 and its coding 197-0006, any idea.
Type: Posts; User: Dzeak21
I have a 6055 and its coding 197-0006, any idea.
It does have an external, but where would it slide out from? do i have to take off the main board bracket and its behind the main board?
Can anyone give me a idea where the HD is in a C6500? I have found the on in the external fiery. But where is the one that goes in the machine.
Thanks
Im having a problem formating a new HD in any Advance series copier. When i hold 2-8 down it should come up with different options instead its just comin up with number 4 which is hd format but when...
On the xerox machines they will give you a print out that the HD has been overwritten I was wondering if the Advance series machines had any paperwork that shows that the information has been deleted...
I have a couple Advance series machines and was wondering if there is a print out like on the xerox that tells you that hd has been erased.
It just rings and rings it doesn't stop. See here the thing we send everything that comes into our warehouse overseas. And we pull and shred all Hard drives that come In. So I tested the fax with...
I got it just had to do a feeder initialize took care of it
No good guys
Someone told me to try a rcon clear for anfax issue and having problems with adf now machine will copy from glass but when trying to make a copy though adf it reads jam but there isn't one hopefully...
i have this machine aND IT WILL SEND FAXES BUT WILL NOT RECIEVE THEM IT JUST RINGS WHEN I TRY TO SEND SOMETHING TO IT. THE MACHINE DOESNT DO ANYTHING.
Im wondering if anyone has the location of the hard drive in a panasonic workio dp6020
Having a problem with a c280 dont know much about these models. The machine has print fax and scan. I must take out hd but when i did the machine would not boot up, so i was able to get in and turn...
Where can i locate the print chip on a Bizhub 421.
yea thanx i figured it out..
I have a xerox 4110 and only know alittle about this machine, anyone know how i can print a CONFIGURATION PAGE on this machine.
No i was told take out the battery diconnect all cords and put a piece of metal on the + and the - for like 3 seconds and it should jump it or something i dont have the paper in front of me right...
I have a an IRC 3380 and the J1 image pass has a code FF now i tried to jump it but got no where any other options i could try.
I have a couple of these machines and some work great and some not too great. I have two codes a CE90 and a CE50. Havent been able to figure these out any ideas.
We inherited a Canon IR C3220 copier/scanner. I want to change the network configuration. When I go into Run Setup, it prompts me for a password. I have no idea what it could be or how to reset it to...
I have a code 841-001 anyone have an answer.
I have three im 9220 in which i am having problems with.. I have some sc codes in which i know what the codes are but the machine will not let me into the service screen stop 0 0 stop 0 1 after i get...
What does this code mean
Now is it on the left or right side i took off the left panel around the fuser and the panel right under the display but see no holes beside the screw holes.
I have a 6085 i dont have to much knowledge of this machine i am getting a E 003 code i have a book the tells me to look for a service button on the inner panel button have no clue.