Once again, you were right on Blackcat! Grid was green. Replaced it and all is well with the world.
THANKS AGAIN
Type: Posts; User: Buddy
Once again, you were right on Blackcat! Grid was green. Replaced it and all is well with the world.
THANKS AGAIN
Thanks Rusty. I did.
I have not Black Cat. I'll check it out. Thanks
Hi folks,
I have a es3505AC there is shading on a portion of the page. I've changed the developer and the drum. Did not make a difference. And ideas? Thanks
58567
Hi all,
I have a 3815A with the MR-4000 doc feeder. Right before the original makes the turn-around it will jam. Doesn't do it every time but it's pretty often. It is also dog-earing towards the...
Well, I tried all of the suggestions. Nothing helped, but I thank you all. What did help was changing the "paper size settings - all drawers to prohibit."
Again, thank you everyone.
Buddy
PS...
[QUOTE=mojorolla;2166008]Check the ADF original width sensor under the original feed tray. Sensor SD3 / SD4.
I'll check, but having 2 new machines with the same sensors going bad seems like a...
I'll double check. Thanks Service Guy.
Hi guys,
I have 2 of these machines that are doing the same thing. When the machines were new, the customers would feed originals normally and the copier would select the paper and copy...like...
Thanks guys. I figured it out. Yup, pull the original 2GB on the main board and replace it with the 4GB. Thanks again!
Can anyone tell me where this memory card gets installed? I've looked on the boards and don't see a slot for it. Does it go in the RDF? Thanks
Thanks everyone! I'll do as suggested.
Hi Guys,
I have a 4111 that I picked up from another company. I went out to it about 1,600 copies ago and changed the developer. The copies came back ok, but now the developer is low again. It's...
Thank you very much, Andrew! I'll give it a try. (Not sure why I couldn't find that in one of the manuals.)
No error code. I'm just trying to clear the maintenance counter.
Have not tried #1048#. Thanks, will give it a try.
Hi Guys,
I have the manual for this machine, but for the life of me I cannot get into the service mode.
When I get to the login, I just get an error. I've tried to reset the service password,...
Hi Guys,
I have a customer with two different machines (MX-M450 & AR-M350) and two different locations that send and receive faxes just fine....except for two area code. 844 & 925.
What am I...
Hi Guys,
I have a new customer that is trying to set up their machine. (It was purchased at an auction.) They cannot get into the admn level with the code they have. Can the admn code be changed...
Thanks Guys,
I tried all of the above and replacing all the related boards - no luck. Did this on a Friday. Went back to it on Monday and it was working! Working that is until I put the back cover...
Hi Guys,
I tried replacing the touch screen. What I'm getting is a faint blue light coming from the screen. There is no image at all on the screen. Machine operates fine. (People are able to print...
GEEEZ, what was Sharp thinking?? Nothing stays clean forever, even if it's in a sealed unit.
Thanks guys.
Hi All,
Well, in over 30 years I've never been unable to remove a glass to clean the optics. What am I missing? (I even downloaded the manual, but all I saw was removing the scanner unit?)
...
Thanks for the responses guys.
I got it working. Installed Sharpdesk. Still get the CE-03 code after a scan, but they're ok with it.
I should have mentioned that their IT guy has them on a...
Hi Guys,
I'm getting a CE-03 ("Consult your administrator or system administrator.") error when trying to scan. When I look at the web page for "admin settings" I get an error [936] "Scanning...