4. "Select the tray for which you want to change the paper settings."
http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001036/0001036159/view/intro/image/atmg020.gif
Notice that Tray 1 is not...
Type: Posts; User: Jeremy-Ricoh
4. "Select the tray for which you want to change the paper settings."
http://support.ricoh.com/bb_v1oi/pub_e/oi_view/0001036/0001036159/view/intro/image/atmg020.gif
Notice that Tray 1 is not...
Rorschach, that looks like the right thing to set, but it didn't work.
When I entered '0', and hit # (enter), the box around the number appeared. I rebooted the machine, and tray 1 is still...
Hi all,
I need to use A4 in Tray 1 of my MP C2800.
I've got the tray setup for it, but in service mode I can't find where to change Tray 1 to A4.
On my 3245C it was 1902, and on the C2800...
Oh friggen heck..
So I thought to my self, maybe IPSec is on?
It was, so I disabled it, and now all is happy.
Do you think it could be a problem with the firmware not liking IPsec?
Right now it's on the DHCP, using the corp network.
On the Config page it says
IP address : 172.27.183.183
Gateway : 172.27.183.129
Subnet : 255.255.225.128
Host Name : RNPCF2AEF
If I ping...
Hello All,
I have a Ricoh Aficio SP C420DN, it's a rather new device to the market, and new to me. During my testing of the web image monitor I seem to have set something incorrectly, and now I...
I think it is only over toning with it's own toner, because it would not print using the other cartridge.
I tried your suggestion, but it seems to have made it worse. I think I'll just make a...
Two months ago we received an Aficio MP 3500, I ordered the wrong toner, and tried to put it in the device.
Then found out the correct toner was Type 4500A 840040.
When I finally got the right...
The toner's I ordered from my normal supplier have arrived.
The only problem is I ordered 4 toners, and they sent 4 boxes of 4 toners.
Oh well. If IKON ever gets back to me I'll just cancel the...
In Late November I ordered a Ricoh Aficio MP 3500 (monochrome) from our normal supplier. We didn't get a toner cartridge with it, and they said they are currently on back order.
So I contacted...
I replaced the both the Cyan Developer and Photoconductor, and everything is as it should be.
Just before replacing these I had the user print a Windows test page, and the entire page was blue....
I have a Ricoh Aficio 3800, with an SR880 two tray finisher.
When printing to the finisher tray 1 or 2 the rollers that should eject the paper do not move. So the paper stops just before the...
O'Brian (Conan)
Try putting paper in tray 2 in the landscape orientation (rotated 90 degrees from how its coming out now). Then print from that tray with the staple.
Is this only happening with the Upper Left...
I pulled the paper tray out, and pushed the black lever. When I did that my coworker said the paper level display went to full.
I pulled the paper tray out, and did not find any paper back there. I even tried using Tray 1 from a CL7200 (same style).
I don't know if all of these devices had the ability to print, but I know some did, because there are drivers for it in Windows.
Check to see if there is a printer port, IE: LPT, USB, or Network.
...
So if there is a problem with the drum it self I will need to change the Photoconductor right?
The back of the photoconductor has an RJ11 style connector. If it's a grounding problem, would I...
Last month we had this device moved to a new building. The toner and waste toner bottol where removed, and stored before the move, but I left paper in the trays.
Sense the move (until today)...
Please take a look at the attached picture, this test page was printed on a Ricoh Aficio 3235C.
The device has about 1000 prints on the counter, and we've had it for about 6 months.
Has the...
Thank you for the information!
As it turns out I was able to clear the code (It might have been SP5-810-1), and all is fine now.
Collar
I voted end user, But I'm kind of inbetween.
I've taken these things apart a few times to install new options like ram, hard drives, and punch units. Also maintain less advanced things like toner...
Hi there, this is my first post.
My Ricoh Aficio CL7200 has error code SC541. Some how paper got jammed in the fuser's connection. After clearing the paper, and rebooting it still comes up with...