Search:

Type: Posts; User: tonerhead

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    45
    Views
    7,041

    Re: canon hard drives

    I know. I have tried it, it won't work with Canon hdds.
  2. Replies
    45
    Views
    7,041

    Re: canon hard drives

    I haven't been able to find a way yet. I once asked at tech support why I can't, I was told Canon hdd's have proprietary bios in the circuit board. I recently discovered that hp hdds can be...
  3. Replies
    5
    Views
    425

    FM1-T423-000 adf sep roller issue

    I've had this issue on a couple DXC58xx series adf's now. Customers call in for noise and misfeeds in adf. I arrive and find that the adf sep roller has a major flat spot worn into it. It would...
  4. Replies
    12
    Views
    1,888

    Re: MP 7503 SC 555

    I forgot all about wall voltage. I remember getting a lot of SC542's from low voltage coming out of sleep mode or powering on. Good tip.
  5. Re: No black on colour prints and colour test page on ricoh mpc4503

    I found another reference, but it is to a color being "light"

    The bias terminalbreaks when thePCDU is removed,so thedevelopment biasis too high or toolow.The shape of the followingparts was...
  6. Re: No black on colour prints and colour test page on ricoh mpc4503

    There is a knowledge base on missing black on a few of the Ricoh color machines. They point at the ITB black primary transfer roller. You have swapped ITB's so I think we can rule out the ITB, that...
  7. Re: No black on colour prints and colour test page on ricoh mpc4503

    I must be missing something here. If you print a black/white only does it work or is it blank? Black is the anchor for alignment and everything. It should be coding if black is not working.
    If...
  8. Replies
    12
    Views
    1,888

    Re: MP 7503 SC 555

    On a previous generation, there was a bulletin about placing spacers in the fuser rear connector to make for a tighter connection. I remember just loosening the screws, cut a paper clip for a spacer...
  9. Thread: Laptop Hell

    by tonerhead
    Replies
    45
    Views
    4,847

    Re: Laptop Hell

    It's funny. 15 years ago I had 3 boys in college. I needed microsoft office for each of them. I think it was office 2007. I went to a site called something with winds in the name. They...
  10. Thread: Laptop Hell

    by tonerhead
    Replies
    45
    Views
    4,847

    Re: Laptop Hell

    Interesting thread. I've cloned and reloaded windows on several machines. After loading, I activate, and just about every time I get "activated through digital license" particularly with Dells. If...
  11. Thread: MP501 quirk

    by tonerhead
    Replies
    14
    Views
    1,337

    Re: MP501 quirk

    Yes, originally it knew there was paper in trays 2 and 3. You could just select either and start copying. It may well have been a connection issue though, as I lifted the copier off of the tray 2...
  12. Thread: MP501 quirk

    by tonerhead
    Replies
    14
    Views
    1,337

    Re: MP501 quirk

    As a followup. I repaired the tray 1 lift (which was scary even for the 2nd time of doing it). I did nothing else as far as programming anything with changes. As soon as tray 1 was repaired, all...
  13. Thread: MP501 quirk

    by tonerhead
    Replies
    14
    Views
    1,337

    Re: MP501 quirk

    Thanks for the answers. This problem happens in all modes copy/print/fax. I have a part ordered for the dreaded tray one lift issue (broken gear stud) So at that time I will be disassembling...
  14. Thread: MP501 quirk

    by tonerhead
    Replies
    14
    Views
    1,337

    MP501 quirk

    I need a Ricoh/Kyocera god on this one. I thought I knew practically everything about Ricohs. The mfp has 2 additional paper trays for a total of 3 trays. All are set to bond, plain paper, and...
  15. Replies
    8
    Views
    1,646

    Re: Another day, another bank

    Right be you, me thinks.
  16. Replies
    8
    Views
    1,646

    Re: Another day, another bank

    Funny, same thing happened to me. Except mine was a medical facility. They also had a computer at the door that vendors needed to check in to. So the first time on the computer, I filled out the...
  17. Replies
    8
    Views
    1,646

    Re: Another day, another bank

    I do a lot of work at casinos also. I've been servicing one for 25 years now. I know everyone there and they know me. Every now and then I get a newbie security person who is trying to make a big...
  18. Replies
    8
    Views
    1,646

    Another day, another bank

    I can understand banks being security consience about outside people/vendors coming in to work on things. Sometimes though it just pisses me off. Today I'm in to fix a copier. He gets my name,...
  19. Replies
    18
    Views
    2,596

    Re: IM C300 SP Mode

    Slimslob is right, the Ricoh sp hdd format really does nothing too exciting. I use a couple of freeware programs for my usage. HDDScan has a nice freeware that reads smart data, then you can...
  20. Replies
    16
    Views
    1,732

    Re: Windows XP, 64bit with a SSD?

    Hans: What I would do is image your current system, go out and get ssd and use it. If it fails, you still have the image. You didn't state the size of the IDE hdd, believe it or not, you still can...
  21. Replies
    10
    Views
    896

    [CQ] Re: IMC 3000 offset on label bypass printing

    Here's another thought. Print to both machines with nothing in the bypass. The red light should pop up and a message of what the print job wants in the bypass for media. It should either be...
  22. Replies
    10
    Views
    896

    [CQ] Re: IMC 3000 offset on label bypass printing

    Sorry, you've swapped fusers and played with temp already, my bad. Is the customer using M$ Word for the labels? You may have to create a "printer" queue which defaults the bypass as heavy stock...
  23. Replies
    10
    Views
    896

    [CQ] Re: IMC 3000 offset on label bypass printing

    Yup, this is likely the answer. The other thing might be going into service and playing with thick fusing temp. It is also easy enough to swap fusers on these two for testing.
  24. Replies
    18
    Views
    2,596

    Re: IM C300 SP Mode

    While I agree that we should not be posting service codes to public. Here might be a work around for you that I have used in the past. With an sc860, most likely the toshiba hdd in the unit is...
  25. Re: What is the dumbist customer comment/question you've heard?

    Just had an interesting one that is a 2.5 hr drive out from the office. Call was for jamming. I go out and find a legit issue. Fixed issue. Ran a bunch no more issue. Tuesday get a call for...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4