Search:

Type: Posts; User: risografist

Search: Search took 0.00 seconds.

  1. Thread: RP3700

    by risografist
    Replies
    4
    Views
    7,512

    [Dead] Re: RP3700

    Turn on the risograph.
    Try to use hot air at this place, for example from a hair dryer.
    if after heating the risograph turns on, then it is likely that STR G6153 should be replaced.
  2. Replies
    5
    Views
    7,142

    Re: Riso Drivers For Windows Vista

    http://risografist.3dn.ru/drivers/RP_CD2_0_Win2k_XP.7z

    http://risografist.3dn.ru/drivers/RP_CD2_0_Win98.7z
  3. Replies
    1
    Views
    1,576

    Re: developer blade gap

    0.8 mm
  4. Replies
    30
    Views
    14,665

    Re: 758 with Jam 32-01

    If you send a one-sided sheet, is it also jammed?

    Make a photo of the place of the jam with a jammed sheet.
  5. Replies
    2
    Views
    7,304

    Re: Riso RP Drum Compatibility

    search: Riso RP Color Drum

    Riso RP Color Drum Risofederal Blue Ink with Case Duplicator Risograph | eBay

    Riso RP Color Drum RED Ink with Case Duplicator Risograph | eBay
  6. Thread: RP3700

    by risografist
    Replies
    4
    Views
    7,512

    [Dead] Re: RP3700

    In the power supply there is a standby board, usualy it is necessary to change the STR G6153 chip on it
  7. Replies
    6
    Views
    2,328

    This problem only for EZ series. It's happend...

    This problem only for EZ series.
    It's happend when a lot of papar jammed. imho, it is not hardware problem.
    Try to change firmware.
  8. Replies
    1
    Views
    4,209

    pull out the drum of your riso. rotate it and...

    pull out the drum of your riso. rotate it and find place "on the upper right hand corner of the stock #10 envelope". stick on a piece of adhesive tape to the master tape in that place.
  9. Replies
    8
    Views
    3,252

    look at the picture

    look at the picture
  10. Replies
    3
    Views
    4,633

    C23 Master Cut Malfunction • If the Master...

    C23 Master Cut Malfunction

    • If the Master positioning sensor is still detecting the master (light
    reflected back) when the Drum is at position-A after the cutting
    operation and the Master...
  11. Replies
    3
    Views
    4,633

    Users manual:...

    Users manual: http://risografist.3dn.ru/manuals/CR_User_Guide_en.pdf
  12. Replies
    0
    Views
    3,621

    Riso Cs2000

    RISO CS2000 - Color Separation Software for RISO Digital Duplicators.
    It is included at no charge with every RZ990, MZ790, and EZ590 unit sale.
    I lost my copy. May be somebody can upload it on the...
  13. Replies
    5
    Views
    2,736

    Put video of working riso (with sound) on...

    Put video of working riso (with sound) on youtube.com .
    May be somebody recognized this sound.
  14. Replies
    18
    Views
    10,493

    CS-2000 doesn’t support PostScript printers like...

    CS-2000 doesn’t support PostScript printers like CI300 or linotronic.
    CS-2000 used only with GDI RISO interfaces with RisoRinc language.
  15. Thread: Risograph

    by risografist
    Replies
    1
    Views
    2,706

    Clamp Error (1) * In 4 seconds from turning ON...

    Clamp Error (1)

    * In 4 seconds from turning ON of the Clamp solenoid in clamp
    retrial, the Clamp safety switch is held still pressed down.
    * In 4 seconds from turning OFF of the Clamp solenoid,...
  16. Replies
    18
    Views
    10,493

    You can use standart driver (from windows...

    You can use standart driver (from windows installation), wich support HP PCL 5 or Adobe PostScript Level 1 ( HP LaserJet III).
  17. Replies
    1
    Views
    2,766

    A4 or B4 drums

    You can use only
    B4 Drum/250 x 353 mm image area
    or
    A4 Drum/198 x 286 mm image area.
  18. Replies
    6
    Views
    11,547

    1. switch off your riso. 2. press at the same...

    1. switch off your riso.
    2. press at the same time left and right positioning button.
    3. switch on your riso, when the battons (2) is pressed.
Results 1 to 18 of 18