Search:

Hi guy,

thanks for the advise. Currently i am using original consumables for this machine.

i haven’t try vacuum hopper yet, perhaps i should try this in next trip.

As for fuser, it looks...

Hi guys,

thanks for the precious advise, will try change the transfer belt and cleaning unit. Will update you all the result.


cheers,

Hi Phil B,
i vacuum pcu and belt unit by dismantle it.

i using original toners.

For me, drum looks like weak with color start fading.

Hi guys,

at the beginning after finding b/w blur print out, i perform the following steps trying to solve the problem.

1) at first i change a drum ( took from other unit) -> remain blur
2)...

dear all master,

i have this dirty copy issued happen every first few pages after machine wake up from sleep mode.

dirty line will gradually disappear after continuous printing.

i did clean...

Ya, you are right.. somehow those error code is not related.. suspect motor and wiring caused the board failure. I did change the board, it back to normal.

somehow, 5 days later, same problem come...

Good day, all the Xerox Expert,


Does anyone come across a problem that machine initially show error 075-212 (Tray 5 malfunction) .. . .

after you had checked / diagnosed or Replaced it (tray...

Hi Experts,

Does anyone tried to configure this mpc2800/3300 with airprint using in iphone or smartphone before?


Appreciate for the sharing..


Cheers!!

dear all,

for my case, i having problem on my cf card.

replace another one using "kingston" , manage to write the firmware into machine again.

Is the line repeat in the same position?

You may perform some checking as below steps:

1, drum
2, ibt belt
3, fuser roller
4, or clean up laser unit

Thanks guy... Will try later and let you know the result

Hi guys,

i encounter a problem with my fax. It always get disconnected during receiving or transmitting fax.

My setting for fax is as below:

G3 Auto
PBX
DP Tone

Hi Nora..

for my case, i replace the door switch, it solved my problem.
you may consider as 1 one your troubleshoot options.

hey guys,

thanks for all the advise, manage to settle it by replacing BICU board.

you all the best!!

yes Rosspt, they are still printing and making copies without the screen display, but if they wanna select copy features, they will use torch light and flash to see buttons. :D

Thank you rosspt and LNorris for the advice given.. will try to replace the BICU board and HDD later.

Iowatech, i had replaces the whole touch panel assy, but remain the same, meanwhile, i don't...

hi guys,

can check with you again this polygon motor will caused the touch panel blankout?

recently having problem with this issued.

thanks for your advise.

cheers!!

Hi Guys,

recently i have this problem on my Ricoh MPC2800 that Touch panel has no back light, touch screen remain can operate by touching on the screen. i have replace the below parts and check...

Hi guys, sorry to update the result so late.

The problem was solve by replacing MOB sensor.. I still figure it out why this thing can caused this code..

Anyway, problem had been resolved.

:) sorry forgot to put in model.

Is fx dcc450

Hi experts,

I have encounter a problem 004-350 recently. This error code means "marking device video failed"

I have replace the following items but remains same problem.

1, MCU - PWB
2,...

thanks ruben & slimslob, will try that out again..

anyway, firmware will caused this problem?

any interest? please PM me.

2566925668

hi anyone interest on the parts attached, please PM me.

Hi expert,

i cannot solve the above error code which is "AGC adjustment level abnormality"

Action that i have been carried out was replacing exposure lamp; board beside lamp; CCD board ;...