Hi Guys I am looking for a canon IR3300 drum unit tks
Type: Posts; User: logonjim
Hi Guys I am looking for a canon IR3300 drum unit tks
Hi Guys any person with a Canon IR3300 drum unit for sale Tks
Hi guys just wondering if anyone has these parts available, please FB5-9445 FB5-9446 and FB5-9491 I can't locate any on the net thanks
Hi sorry just seen your reply this feeder is on the Canon IR22/28/3300
Hi Guys. I know this is an old one but I am looking for parts for this feeder FB5-9446 . FF6-1291. FF6-1292. FB5-9445 can anyone assist me Please?
Thanks for reply I have ordered a feed and a sep roller and will fit them when I get them it does not look too difficult . I will let you know the outcome.
Paper guides intact .Feed roller a little wear but not much.I cleaned it with spirits. But what is strange is registration is ok and no service errors just (Incorrect Size/Setting Drawer 1. Sep...
Thank you for reply .
Yes service till 8 years ago retired due to ill health I never worked on printers tho. I remember some fax machines would give the same error .Incorrect paper size
and this...
Hi Guys
The machine says incorrect paper size after 3 prints all set to A4 . Do I have a feed problem? Registration is ok on the prints .Tnanks stay safe everyone
Hi Guys anyone have an alternative part number for these rollers FF5-4552 pick up rollers for IR 2200 Thanks
Hi Guys has anyone got a service manual for this printer?:confused:
Hi Guys
Might be a bit of a long shot where can I get this drum or even the drum and blade in Europe it is for the IR2200/2800/3300
regards Jim
Hi Guys might be a long shot anyone with an old Ir2520 Fuser I am looking for the exit guide its the one that the exit sensor sits on part number FC9-1068 old one warped and cracked or perhaps a...
Hi Guys I managed to get a hard drive for the machine and is working perfectly again . Thanks again.A great box but Canon decided to end its life way too soon as it was too reliable.
Ok Guys wall voltage ok constant at 230V the machine produced the dreaded error code today E602-003 so must have been a Hard Drive problem all along I removed and cleaned the Dimm so I guess that is...
Hello Teckat No I have not checked that out . The machine is in an office on its own and other electrical items working ok I might try a change of fuser if I can locate one tks for tip
I have checked out the fuser gets to the temp that is required film and rollers are ok and No errors at all.Looks like a temp. issue but as I said reaching proper temp.
Hi Guys I know this is a very old machine but slight problem The machine takes a while to warm up and then when you make a copy it does not come ready for about 10 seconds after copy is...
Thanks for info alas there is no fuser speed adj in the service mode. There was a spring loaded guide for deflecting the paper out that used to have black sponge pads but were modified to white and...
Hi Guys and Gals
Anyone have a problem on last few inches of an A3 sheet that wrinkles intermittently. I remember going back a few ago about a setting in the fuser service mode or is this just a...
Just looking at this post the oldest one I ever worked on was an Apeco roll-o-matic and also the first plain paper one was an ABC 300 a real fire hazard. Fuser was made up of two lamps and the paper...
I would suggest you have a service done on the machine and to replace all rollers in the pick-up area
Number of boards on the top right hand corner of the machine. Remove them all and clean contacts and re-seat them all and make sure they are all square . These can become unseated and cause weird...
Sorry Guys its the i.sensys MF8040Cn service manual I am looking for.
Hi Guys,
I am looking for a service manual for the Canon i.sensys MF8400Cn .Can anyone help me out please?