I am working on a CLC400 with a Fiery controller. The front of the Fiery sits in the logo screen. The interface ( monitor hooked up) shows its looking for the "log in server". What is the log in...
Type: Posts; User: tmanamore
I am working on a CLC400 with a Fiery controller. The front of the Fiery sits in the logo screen. The interface ( monitor hooked up) shows its looking for the "log in server". What is the log in...
Does anyone know of a color Ricoh that will run transfer paper thru it? Or a way to make one run it?
I have a CLC 1180 that keeps coding out with E061-36. I changed the charge grid with no results. Also, the screen seems to flicker. When I cheat the door and lower the transfer unit lever, the...
Thanks for the manual location but where can I get the Toner Supply Driver PCB? Is that what my next step?
Does the Toner Supply Driver Board as last posted feed the toner bottle clutches? If so, where could I start looking for one?
OK. I've checked and found that the yellow toner bottle clutch is not engaging. I swapped the clutch with another color to see if it worked and it did. Seems like the clutch is not being told to...
What is the proceedure for setting up SMB scan to folder on a KonicaMinolta BizHub c250?
I have a Canon CLC1180 with a ColorPASS z500 fiery. I badly need to print from windows 7. I have the driver in my Server 2003 but I still need a driver. Can anyone help?
What is the process for resetting the machine?
My Riso GR3710 is printing light. Adjusting the density doesn't help. I cleaned the screen and still light. Can anyone stear me in the right direction?
Thank You Very Much!!!
THANKS SO MUCH!!!:cool:
I have a Ricoh GX7000 printer. It was working fine until I tried to turn it on today. The power light went on for about 2 seconds then turned off. Anyone know what could be the problem?
On my X3e controller, there are 2 ethernet plugs. Does one go to the machine? Do I use a crossover or standard cable?
I have a Konica minolta Bizhub Pro c500 with a X3e controller. I tried to log in thru the ops panel but is asks for a user name and password that I do not have. So I tried to web interface in and...
Its a fiery server model MXP-03e. Please help.
I'm not sure what controller it is. It's a flat box hooked to the top right side of the machine. Where should I look for this information?
I have a Canon CLC 1180 that I'm trying to print to. I went to the Canon site and it says that the driver is in the OS but no CLC driver is in the add printer wizzard. Where can I get a driver or...
What is the process for replacing and calibrating the color starters on a CLC 1100?
I am havint =g the most difficult time with what should be easy. I'm trying to set up scanning on an Aficio 3224c to a PC running Windows 7. I set everything up for SMB scanning to folder, set up a...
I tried putting in a "C" rom and hooking up a fiery. The print job goes into "NG" status. Any ideas?
All the settings are proper and I can print an internal pattern ok.
I just installedan IRC3220 and set everything up for direct IP printing. When I send a test print to it, the processing light flashes, it says processing but does nothing else. When I check the...
I am working on an Imagerunner IR5055 with an error code 00000e-0010. What does that point to?
Can a KM-1128 be set to switch trays automatically and where is the setting?