Hi,
The E-540 error code is the home position of the lead cam cannot be detected within a specific time.
That's what the book states.
Most the time something is blocking the output...
Type: Posts; User: James Hilton
Hi,
The E-540 error code is the home position of the lead cam cannot be detected within a specific time.
That's what the book states.
Most the time something is blocking the output...
Hi all,
This equipment is new to me. Can any one let me know how I can solve this issue ?
1. ) a feeder jam ? I follow my common sense and remove the jam, but I test the machine...
A few times a day.
What's the diffence between Santa and Tiger Woods ?
Santa stop at three Ho's
Ho Ho Ho
Hi,
Just want to ask more about this code?
As any one seen this ???
This machine pop a E202 code weeks ago. I found the issue an fix it.
OK.
Last week that code happen again( e202 ) but a...
That would be a Canon NP6050 there was two of them, but one die !
I'm using that of parts !!!!
What are you thankful for ?
Me, I'm thankful that I have a job.
A lot of people are having a very hard time, because of being out of work.
Have a good one !
Hi Totoro,
Blitzkreagg is right.
the E005 is dealing with the web, and / or it sensor.
You know this anyway.
Double check yourself.
Check that the web is put in right. You stated that it's...
Hi guy's,
I'm trying to send you the file, but my account say that the file is to big.
Check your e mail.
OK
James
Smiley,
I do have a pdf file for that machine.
what's you e mail address ?
James
Hi,
The error code states: A short-ciruit in the fixing heater drive ciruit
(SSR,etc ) is detected. but you already new that.
Have you reset the machine ?
James
Hey to all,
I was in Mississippi last week.
The prices was 3.65 a gallon.( Sat. Aug. 9th )Reg.
Back in Boston, Ma. It was 6.85 a gallon.
It is going down.
Lets hope it's going down under 3...
Hi all,
I been away for a week. I went down to Wakeland, Miss. to help rebuild house with 30 member of my Church. ( Newton Pres. )
I worked on 3 sites.
The last site was the biggest job!
We...
Hi All,
This is old but it worked.
I had 3 6085;s main paper tray ( high cap ) plastic piece came off , so the elevator would not lift ?
I made some holes and used nuts, and screws to hold it...
Have have two !
old but the best !!!
Xerox 1090 (Dam good work horse) and
The Xerox DT135
xcopytech,
Can you be nice.
Bubu just looking for some help ?
Bubu,
You just need to clear that code !
To clear the code.........................Yes xcopytech is RIGHT.
You need a...
Like Jimbo 1 stated.
adding toner to a machine, than it's on the floor, in the equipment, and it's on you !!!
Hey everyone,
Sunday, the price I paid was $3.99 per gal.
but it's going up.
other places was $4.05
They say that the prices will be around 4.32 to 4.50 for the summer.
We will see what...
No !!!!
Boston in 7
LA are good,but Boston is the better.
Hi to all,
What your thoughts on who will win, and/or how the series will go ?
James
Pontiac,
try this,
Go into sevice mode.
Copier>Function
<Clear>
cleaning Ram/Error code histories
Try
PWD-CLR
(it's use to clear the password set in user mode foe system Admin.
Hey everyone,
For reg. gas the lowest is 3.13
the highest is 3.29.