can I just ask what you mean by "build over the part in red". I have a call which has been escalated to me as the prints have gone light and I think drum and dev assemblies have been replaced. I...
Type: Posts; User: mabawser
can I just ask what you mean by "build over the part in red". I have a call which has been escalated to me as the prints have gone light and I think drum and dev assemblies have been replaced. I...
thanks Hans.
It is still in the early stages of discussions so a lot still has to be talked about.
We have a 18 month old boy to consider too so there is a lot to think about before we decide....
Hi,
My partner possibly has a job opportunity working in Dubai. If she takes the job then I will be actively looking to seek a position repairing MFP's.
What is it like to work there? What's is...
No it hasnt been worked on at all for weeks and the last call had nothing to do with the fuser area at all either. This was the fault I was called in for. The fault doesnt seem to have been caused by...
thanks teckat,
I have access to these bulletins but nothing so far has helped find the fault.
so far I am at a loss.
the trip switches are fine to start then the one pictured trips.
hello,
I currently have an imagepress which throws up the above code on warm up. The trip switch on the PSU for the fixer heater PCB keeps tripping. I checked the voltage from the fixer heater...
cheers teckat, will look into that and let you know the outcome. out of curiosity, where did you get that bulletin?
I have a machine that when switched on 1st thing in the morning (either from sleep mode or from being switched off) it shows a phantom jam (0CF1 jam). open and close the front door and the jam...
i have a DSM 735 jamming from tray 1. when it jams it doesn't seem to have even tried to feed the paper. the feed rollers are ok. I swapped the tray and still the same. I have swapped clutches with...
that was supposed to be 18 months!!!:mad::mad:
Hi guys,
got an 8095 which if you can see on attached has got backgroung/banding across the page. main corona has been replaced,etb and etb cleaning assemblies have been replaced and still the...
my company did get a katun kit with a drum and a blade in it but they were not worth a shit. 99% of the time its the charge rollers anyway
unless it is a copy of an already printed calibration page!!!!:D
:D:D
have you found anything with this yet? I think Gary was trying to get Gavin to ask his trainer in woodhatch if he had (or anyone else) any ideas!!
dont think he was getting anywhere to be honest...
yea, we have a write up regarding this that my collegue didnt read so I have given him this to try and hes away to try and see how it goes.
cheers and will let you know how he gets on
A collegue of mine has the above machine asking to remove and shake the black toner. you do so and it works for 15 mins or so then come up with the same message. he has replaced a black drum unit...
the rail is a prime candidate for this fault. also something else I have come accross was the white ref plate under the glass getting dirty (think it can give a different issue mind?!)
hope you...
a pair of heavy duty snips or metal cutters will do the job in seconds. this is what we do.
we use the B2242042 drums for all ranges of machines and modify to suit depending on the range of...
this can also be the dev unit drive gear. if you pull out the whole pcu unit and look in behind it you can see 2 drive gears. the bigger one of the 2 touches the dev drive gears and can get worn....
Hi Joseph,
the dev unit and drive motor (as mentioned) has already been fitted. cheers
teckat, this machine is heavily used so doubt this will be cause.
The dev driver board is what has been ordered just now. not had an update yet to see if this has fixed it or not.
cheers
Hopeyou are both well, I have a imagepress giving me a E023-010 error, dev sleevemotor lock error, have you come across this fault yet?
I have just recieved the above email form a collegue. He is...
i reiterate black clouds thoughts on this.
If you look through the browser you can see the 202 or as mentioned shine a torch on the touch screen and you will probably see the code there too. One...
Cant remember exactly the jams codes. definatly got 0113. I had changed the full side part from another machine that sat next to this one and it didnt make a difference so doubt it will be the...
Ill 2nd pepper, if it was alright before and only after you cleaned the optics will have knocked a mirror out slightly