Guys, I have installed new IM 2702 but when I pressed address book function/icon, there is nothing shows on the display. I can add only names through web image monitor. I already updated the package...
Type: Posts; User: sharpmind
Guys, I have installed new IM 2702 but when I pressed address book function/icon, there is nothing shows on the display. I can add only names through web image monitor. I already updated the package...
Problem solved. The error is resolved by replacing the FFC (D2445372) that connects BCU and IOB
According to user, there was a sudden power outage in their office. When the power went back, the SC 665-02 error showed in the machine display. When I come to check it, I restarted the machine...
I have not tried yet to replace the flex cable which connects the BCU and IPU. Is it the connection you are referring to?
Guys, have you encountered this kind of error? Updating the firmware is not possible. The SP mode becomes Chinese language. I already replaced BCU and IOB. I removed all the toners and disconnected...
AUTHENTICATION FAILED when computer name is used in the folder path. Using IP address in the folder path, scan to folder is working. What setting do I need to change in order for scan to folder to...
Yes, you are correct. The development units are all empty. The machine is having an error SC 362-04 so we checked all the PCDU to make sure there is no other problem. To our surprise, all...
Guys, what is the cause when all development units has no developer inside. Is it because the life of the development unit is reached already? Have you encountered this kind of problem?
How can I switch the service mode lock to OFF when there is fusing web error? I have to reset the cleaning web unit counter in SP 1902. I was unable to go to SP MODE because the administrator locked...
Guys, is there a way to reset this kind of fusing error? please help.
I bring my own wireless router and put it beside the machine.
Steps i have done...
enabled the wifi features of the machine
user tools>screen features> interface settings>wifi network.
...
Machine is already connected to the access point. I try to ping the IP address assigned but the TTL=64ms. The web image monitor is not showing when using the browser. Using the Ricoh connector,...
If the printer and the laptop can connect to the access point, how can I know the acquired IP address of the printer? I checked every setting but I cannot find the acquired IP of the printer.
Can you guide me on how to configure wireless printing/scanning using the WIFI features of the machine?(SCREEN FEATURES--WIFI--ON). For example, the client has wireless router which is 15 meters away...
After upgrading from Windows Server 2008 to Windows Server 2016, the scan to folder suddenly not working. There is no new firmware update available in my-ricoh.com. Have you faced this kind of...
Normally, I am using static IP address in SMTP server when using Filezilla server. Is it possible to use the computer name instead of IP address in SMPT server? Can you guide me on how to configure...
Can you share with me the steps on how to do it?What i know is filezilla server using ip address.
Is there a way to configure FTP scanning in a DHCP network environment?
If I change the controller board and use the old nvram, will the controller board be damage again?
How can I make the scan to folder work without disabling the firewall in Symantec antivirus? Applying new rule in inbound rules in advance firewall setting, port 139, 445 exemption does not resolve...
no..there are system copy, network support, network doc box, printer firmware in the SD card.
Is it possible to download the engine firmware from the machine of same model unto SD card?
after switching the machine on, performing firmware update is showing in the display. Then it will throw SC 670.
After updating the engine firmware by mistake, SC 670 appears in the display. It seems that the firmware loaded is old version. Is there any way to recover the machine from that error except by...
As I checked the MP 3055 configuration setting, there is no domain name entered but still the scan to folder is working. How come that scan to folder in MP 2554 is not working even I copied the same...
DNS and domain name are the same as other machines. Port 445 is selected when I print the configuration page.