Can anybody told me how i can change the whole magenta housing and put new ,also how i can fill it with developer,and if have to make any nvm read write after install new developer? Thanks
Type: Posts; User: Faraohgr
Can anybody told me how i can change the whole magenta housing and put new ,also how i can fill it with developer,and if have to make any nvm read write after install new developer? Thanks
Any additional help?? Nobody can help me? Plz help!!!
Hello againd i dont know how to remove photoreceptor!!!!So i check this !!!! In magenta the ATC target is 644 and the ATC average is 233!!!and the ATC amp 172 the others colors are ok!!! Itry to fix...
Thanks !! I know that the 240 toners include developer inside toner mixture-
But i have to tell you something new that i found ,i found and remove a piece of gluepaper!!!! over the spring, which...
[QUOTE=ZeusGT;302285]You are going to need the PWS to change out the developer in your Docucolor.[/QU
I have order the whole magenta developer housing to change it!! I hope that this will solve the...
The whole magenta developer housing? how i can check the bias voltage ?what exactly i have to do? Thanks
Guys help from Greece!!!!! When i try to print some posters and due not receive yet my new drums ,i try due a magenta line in every print ,to put some old drums to do my job till the new arrive...
30 dollars if anybody helps me. 30 dollar via paypal ...Help
WHERE i can find pws software does anybody know ?
these is the eaysiest way , i pay before some days to change the heater roller what i have to do now to throw it ?
i have take it from an older fusser that never warn me to change it a put on it , i cant understand if it is burned, is there anyway ? and i dont have a multieter to see...
Also ne to i need pws software i have service manual for 240/250 for change...
Is on the fuser, also i have put 3 different old fussers and the machine is in the same state( that i change it without warning me just i make some signs to the heater roller and thats why i change...
replace now
Yes follow the above link try to reset hold down power save,stop + 3 and then propably you can get it , anyway do you have any suggestion to my problem ?
Hi everybody i try to fix a problem ,i put a new heater roller and after some days in consumables it says replace fuser and i cant print from pc i suppose that the warning doesn't let me print ...
Andriasto if everybody here has pws there is no need to come inside this forum and ask about problems,
For the problem and the error code 010-320 follow these and you will resolve your problem !!!...
Hello ,is anyway to reset (via NVW or anything else) and extend the fuser life cause the condition of the fuser is excellent?
Also is anyway to do the same for drums ?
Thanks a lot
Hello from Greece , my Xerox DoCuColor 240 ask me to replace drums CMY .but i had already replace with new before 2 months!!! Does anybody know what is the NVM chain value to clear this error ?...