Search:

Hi,

I am facing a new issue with MPC306ZSP , MPC3004ZSP and MPC2003SP machine.

Above 3 model machines were had same problem at the time of installation in different customer locations, the...

Thank you

Hello, Thank you for your suggestion, but could you please explain how to use the the second network, to configure the default machine feature for scanning.
FYI - Customer is using Mac book pro PCs...

Hello,

We have installed a MPC4503 machine with Fiery E22c and configured with Mac PCs for printing, there is no issue for printing.
The issue with scanning configuration, in fiery utility, when...

Thanks a lot to all of you, we use to feed our sr.center fax number using SP mode, As i mentioned on my first query, is it possible to get all the details to be printed in the meter reading page.
...

Dear All,

I would like to add maintenance contract details in to Ricoh MFP, like Click charges, Contract Number, Minimum Billing Amounts,etc..
Is it possible to get all the information printed in...

Hi,
Thank you for your information, let me try to get the prices for the same.

Hi all,

I would like to know the Cost per page of TASKalfa 520i, Looking forward your guidance..
Regards,
Raja.

Hi,

I have a MPC300 installed in customer place, where there are 40 users, I do not want to change any settings in the printer driver, But I want all the users print jobs go directly to Document...

Dear ,
As you mentioned,I confirmed the New BCU is B234 & the New SD is D101.
Now, I have MP9000 which is down and MP1350 which is running fine.
Please advice the steps to up MP9000.
Thanks &...

Dear All,

I am facing a problem with MP1350 & MP9000.

Our Engineer went to upgrade the firmware of the MP1350 machine. Mistakenly he upgrade the system firmware first, then he switched OFF &...

Dear All,

I am facing a problem with MP1350 & MP9000.

Our Engineer went to upgrade the firmware of the MP1350 machine. Mistakenly he upgrade the system firmware first, then he switched OFF &...

Hi,
I have a Question - Will MPC 7501 Toner can work in MPC7500?
Please advice..
Regards,
Raja.

Dear,
The better way to find out the problem is leave the door open,pull out all the trays,remove the connection of DF,pull out Transfer,fusing unit and switch on the machine.
If still please wait...

Thank you all, Let me try to disable the network security settings.
I will update -once i completed.
Regards,
Raja.

Hi,
I am facing a problem with new SPC232SF, as a printer the machine is working fine - no problem.
i configured push scan (Scan to Folder) and dns ,domine , ip,subnet,gateway everything perfectly...

I will be ordering for a drive unit..Thank you for your reply..
Regards,
Raja.

Dear All,
Please open the below links..
One of my customer try to repair the machine (MPC2500) and somehow they manage to break the female connector(Frame side) of the drum connection.
I am not...

Thank you all,let me try out my best to solve the problem.
Regards,
Raja.

Machine Model :5508
I am getting the Error code of 126 and 970 randomly -Any suggestion?
Regards,
Raja

Hi,
Is that MPC1500 heads are similer(Same) with Epson Print heads?
Regards,
Raja

Yes I got the culprit, it’s a pinched wire which is going to a sensor on PTR Section.
Regards with many thanks,
Raja.

Hi ,


The Problem of the machine is that once we switch on the machine the display shows ‘please wait’ and its just stay on the same.

We have interchanged all the PCB’s (DRB, DTMB, Paper Feed...

Thank you for your advice on this issue. i have solved the problem by changing the setting into factory default.Its working fine. Regards,Raja.

Please update,
regularly..
Regards,
Raja