Image stabilization control is performed before, during and after the print cycle.
I believe that the machine will give an alert on the bottom of the screen when you have the bad print, this will...
Type: Posts; User: Megato
Image stabilization control is performed before, during and after the print cycle.
I believe that the machine will give an alert on the bottom of the screen when you have the bad print, this will...
Thank you very much mx6turbo89, i did "total Clear" restarted the machine, set the appropriate speed, and the machine is now back to life.
I updated the firmware, it was successful but, the same code ( CD301) is still there.
Oh, Thank you very much i downloaded the file, will give it a try and let you know the result.
Very much appreciated your quick response
Synthohol, Many thanks for sharing the file
mx6turbo89, exactly, i need that software bundle, moreover do you think that rewriting firmware could resolve this issue, if so then why it is...
Hi Mick01,
Thank you very much for sharing the software, i wonder if you have the Firmware imaging toolkit for BH215, as i have one machine with error code "CD301; eeprom error" the only solution...
Hello there, any one can help me fixing this? i have the same error code on BH 215, nothing is mentioned except for "
EEPROM error
- Contact the responsible people of KMBT before taking some...
I HAVE Samsung CLX-3175 continue job without stop WHEN I PRESS 1 COPY IT WORK CONTINUE WITHOUT STOP I AM REST IT BUT NO NEW
CAN YOU HELP ME
What about the transfer roller??
This machine does not support secure connection for email accounts, which is the case with gmail.
In the attachment there are 2 vertical white bands, appearing only in 1200X1200 Dpi test pattern and not on the other ones, these are the same bands on as mine.
I have the same one, on an MP c2050
Yes you can, simply, make sure that both the computer and the machine have the same subnet mask.