If it means anything, I have the exact same issue with a HP Designjet T1700ps 44" brand new. If I run internal demo prints or diag images its all ok. All line feed and alignment auto adjust settings...
Type: Posts; User: pioneer007
If it means anything, I have the exact same issue with a HP Designjet T1700ps 44" brand new. If I run internal demo prints or diag images its all ok. All line feed and alignment auto adjust settings...
If it means anything I'm having the same issue with two new MXM653, Its a Title company running letter-R and legal docs, mixed originals. They scan to network folder. The transaction report for the...
I'm totally Convinced!
I believe this has been done, won't read the sit chart.
MX-C&B401's, Same as the 311 "I believe" have weak fusers, or weak fuser bearings, replace the unit, rebuilding is time consuming with mixed results.
Seems Sharp decided to over engineer these...
What?
Load SharpDesk. Beware of the OS the computer is using, Windows 7 wont work with 3.2 but 3.2 needs installed using the key code. The key code is important. If you dont use it you'll understand why...
With U2 errors I would check power at the plug as well. Sharps like stable clean power.
Just a thought!
I cant beleive I'm hearing this!
I love 5500's, 200k aint nuthin!
I dont think your issue is with hardware. Possible but not likely.
You can also vary the Nic settings.
Look at print driver versions that correspond with their Mac OS closely.
There are other...
No..........and no.
Alive and well thank you. Number probably dropping but new blood still finds it iteresting with the digital modes. Integration of computer and radio. PSK31 being a personal favorite. Their are also...
[QUOTE)No, but my neighbor across the street is. Interrupted our cordless phone signals. We've told him about it, nicely. Let's just say he didn't respond too well. So we changed phones and it's...
The unfortunate thing about sales is that they are snake oil salesmen and used car con men coupled with being technical idiots.
The Beattles said it best. "Lieing with their eyes while their hands...
I chased random L4-12 2nd transfer error on for a couple of weeks. Replaced REGS_R reg/procon sensor unit and shutter and had same problem. Long story short the Emag clutch driven by the fuser drive...
+1
Set Nic speed to fixed instead of auto. Gigabit switchs confuse 10/100 auto negotiation.
Had the same exact issue with macs.
After spending 3.5 hours, I pulled the keyboard out and manually keyed in the email address, low and behold a small file size.
Now remember boys and girls, saved web based address and configurations...
When scanning I"m pressing the blk button. All setting on both appear to be set the same way.
I know these machines well, and also know the variables between mono, greyscale and color.
I have two MX-5001 that sit side by side, same company, same network, same compression settings, same firmware, machine options the same with the exception of one having PS activated the other does...
If I recall, the primary charge has been pulled out.
Going off memory from distant past.
Thats a very old box.
Excellent my friend, and thank you!:)
Wow, lots of questions:
Flat spots on the resist rollers in paper feed is not normal and needs replacing, it is a common issue.
Jamming at the pre-registration also common, could be the result...
Exit sensor as it leaves the fuser? The one mounted on the door?
We have very few Toshibas left in the field as were Canon, Sharp and HP dealers. These are remnents of a previous aquisition. You may...